Home > Products > Axles Shafts & Bearings > Axle Shafts, Rear > Dodge/Chrysler > CHY 8.25" >

Chrysler, 8.25", 08-13 Jeep Liberty, 07-12 Dodge Nitro, 29 Spline, 30-7/8", Rear Nitro Axle Shaft, 1.705" Bearing Journal
8.25" Chrysler Nitro Axle


 
Alternative Views:


Price: $161.95


Product Code: AXC52114548AC
Qty:

Description Vehicle Applications Warranty Information
 

Nitro Gear & Axle
1541h High Strength Axle Shaft
Chrysler 8.25" Rear Nitro Axle Shaft
Fits Left Passenger & Right Drivers Sides
29 Spline 30-7/8" Long

Fits:
2008-20013 Jeep Liberty KJ
2007-2012 Dodge Nitro



Rear Differential: 8.25" 10 Bolt Chrysler
Axle Shaft Length: 30-7/8"
Axle Spline Count: 29
Wheel Bolt Pattern: 5 x 4.5"
Bearing Journal: 1.705"
OEM #: 52114548AC
Material: 1541h steel


Note: This axle shaft is compatible with or without ABS, however the abs ring is not included. Your existing ABS tone ring can be reused.

Associated Replacement Parts:
Axle Bearing & Seal Kit AK6410

NITRO TOUGH


Nitro 1541H steel and 4340 alloy & chromium and molybdenum alloy axles commonly known as "Chromoly"

Our OE replacement axles are made of 1541H steel for a 25-35% increase in strength over their stock counterparts. Nitro 4340 Chromoly axles are also heat treated but are designed with extra material for strength where it's needed. All of our axles are precision machined to OE specifications for excellent fitment.

1541H steel is a heat treated, carbon steel with .41% or less of other impurities. The heat treatments make the metal harder, with out making it brittle with a tensile strength of 181,000 psi. Up to 35% stronger than OE axles.

4340 Chromoly steel, is a lower carbon steel with a minimum of 10% chromium by weight. Known as a high strength, low carbon steel with a tensile strength of 228,000 psi opposed to OE standard 1040 steel with a tensile strength of 110,000 to 130,000 psi.
That means they take more punishment, to get you further down the trail or off the trail entirely. That's Nitro Tough.

Nitro also offers extra long-splined shafts which can be cut to length and blank shafts for custom spline machining. Each new product is subjected to multi-point inspections and then actually installed and set up by Nitro's own in-house differential professionals to ensure excellent fitment and easy setup. At Nitro we strive to meet demands for new ratios and Fits and we are continually developing new products to stay ahead of the competition.

  • CNC precision machining & heat treating processes ensure excellent fitment and overall strength.
  • Our heat treatment is applied after the splines are cut which allows for deeper penetration where strength is needed.
  • We have a rapid and ever growing range of products to meet new demands and Fits.

Please contact us with your specific questions and inquiries.

Nitro Gear & Axle strives to provide the highest quality differential components available. We take the steps necessary to ensure our parts are dependable. Our product range is continually growing to meet the needs of consumers for new ratios and applications. At Nitro we know differentials, and know what it takes to provide you with high-quality components.

Features:
  • CNC precision machining & heat treating processes ensure excellent fitment and overall strength.
  • Up to 35% stronger than OE axles.
  • Our heat treatment is applied after the splines are cut which allows for deeper penetration where strength is needed.
  • Precision machined to OE specifications for excellent fitment.

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

Products > Axles Shafts & Bearings > Axle Shafts, Rear > Dodge/Chrysler > CHY 8.25"
Shop by Brand > Nitro Gear & Axle