 |
 |
 |
 |
Ford 9" & Chrysler 8.75" Chromoly, Cut-to-Length Axle for Dana 44 /60 OE Replacement
1965-1972 Plymouth Valiant
1965-1969 Plymouth Barracuda
1970-1972 Plymouth Duster
1965-1972 Dodge Dart
1971-1972 Dodge Demon
1969 Dodge Newport
1965-1969 Plymouth Fury
1965 Dodge Custom 880
1965 Chrysler 300L, 1965-1969 Chrysler 300
1965-1969 Dodge Polara
1965-1969 Dodge Monaco
1965-1969 Chrysler Town and Country station wagon
1965-1969 Chrysler Newport
1965-1966 Chrysler Windsor (Canada only)
1965-1966 Chrysler Imperial
1966-1969 Plymouth VIP
1970-74 Dodge Challenger
1970-74 Plymouth Barracuda
1965-1970 Dodge A100 Van
Differential:
|
Dana 44/60, Ford 9" & Chrysler 8.75"
|
Length:
|
27"-30.56" Cut-to-Length
|
Axle Splines:
|
35
|
Type:
|
|
Bolt Pattern:
|
5 x 4.5"
|
Material:
|
1541h (25% Stronger than OEM) |
Manufacturer:
|
Nitro Gear & Axle
|
Warranty:
|
5 Years*
|
Tech Note:
Dana 44 & 60 Semi Float axles, can use optional AXDana 44-SPACER for more break offset.
Uses threaded wheel studs.
These are a semi-universal axle, and designed to work with most popular custom Fits, please check your requirements before cutting.
Nitro Gear & Axle now offers an assortment of Heavy Duty Cut-to-Length (CTL) rear axle shafts. The CTL axle shafts feature extra Long splines and can easily be cut to the desired length with a chop saw. This allows Nitro to use stronger rolled splines rather than cut splines and allows fewer part numbers to cover a wide range of OE and custom Fits. This also makes it easier for Offroad, restoration, and Rod Shops to stock axles since they fit so many Fits.
Nitro Gear & Axle strives to provide the highest quality differential & axle components available. We take the steps necessary to ensure our parts are dependable. Our product range is continually growing to meet the needs of consumers for new ratios and Fits. At Nitro, we know differentials and know what it takes to provide you with high quality components.

*All Nitro Gear & Axle brand products are warrantied to be free of manufacturer defects for the specified period. Warranty requests must be made by the original purchaser and submitted by the dealer purchased from. Any parts sent for warranty consideration must be pre-approved and shipped prepaid freight to our facility with copy of RGA for our inspection & determination. We will not pay for labor, shipping cost, loss of revenue or perishable goods, commercial losses, costs of telephone calls, shipping or general inconvenience. This is our only warranty expressed or implied. Unauthorized warranty returns may be refused. Warranty generally covers MFG defects in material or workmanship. Abuse, overloading, improper lubrication, misuse, commercial or competition use voids warranty. Normal characteristics are not warrantable, such as Gear whine. Minor cosmetic flaws, dings, burrs from shipping or manufacturing, are not considered defect, it is installer responsibility to address these at time of install. Customer is responsible for shipping charges if warranty is granted. Warranty is for the original purchaser/user, is not transferable. Warranty covers one replacement or credit solely at our discretion. Warranty determinations are at our sole discretion.
In addition to the above conditions, see special notes for these products:
Ring & Pinion – Warrantied against manufacturing defects. 2 years from date of purchase. Must provide set-up specs.
Chromoly front Axles, Excalibur Joints, 30/30 Birfield kits - Warrantied against manufacturing defects for the life of the vehicle. These products are also covered for Breakage. The Shaft / joint must be BROKEN. Wear, twisting, bending are not warrantable. Damages caused by failure of other parts are not warrantable, for example broken U-joint (other than Nitro Excalibur) causing damage to Axle ears.
Rear Chromoly Axles - Warrantied against manufacturing defects for 5 years. These products are also covered for Breakage. The Shaft must be BROKEN. Worn, twisted, or bent axles are not warrantable.
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features:
- Eliminates the cost and need for custom Axles!
- CNC precision machining & heat treating processes ensure excellent fitment and overall strength.
- Up to 35% stronger than OE axles.
- Our heat treatment is applied after the splines are cut which allows for deeper penetration where strength is needed.
- Precision machined to OE specifications for excellent fitment.
|
|
 |
 |
 |
 |
|
 |

|