Home > Shop by Brand > Nitro Gear & Axle >

Dana 70 & 80, Full Float, 37 Spline 35.5"-39.5", 8x3.96, Nitro Rear Cut To Length Axle Shaft
Full Float C-T-L Chromoly Axle


 
Alternative Views:


Price: $220.00


Product Code: AXFF37-39.5
Qty:

Description Warranty Information
 

Dana Spicer Model 70 & 80
Full Float, Chromoly, Cut-to-Length Axle



Differential: Dana 70 & 80
Length: 35.5"-39.5" Cut-to-Length
Axle Splines: 37
Type: Full Float
Material: 1541h Steel
Bolt Pattern: 8 x 3.96"
Manufacturer: Nitro Gear & Axle
Warranty: 5 Years*



Nitro Gear & Axle now offers an assortment of Heavy Duty Cut-to-Length (CTL) rear axle shafts. The CTL axle shafts feature extra Long splines and can easily be cut to the desired length with a chop saw. This allows Nitro to use stronger rolled splines rather than cut splines and allows fewer part numbers to cover a wide range of OE and custom Fits. This also makes it easier for Offroad, restoration, and Rod Shops to stock axles since they fit so many Fits.

Nitro Gear and Axle Nitro Tough Axles

Nitro 1541H steel and 4340 alloy & chromium and molybdenum alloy axles commonly known as "chromoly":
Our OE replacement axles are made of 1541H steel for a 25-35% increase in strength over their stock counterparts. Nitro 4340 chromoly axles are also heat treated but are designed with extra material for strength where it's needed. All of our axles are precision machined to OE specifications for excellent fitment.

1541H steel is a heat treated, carbon steel with .41% or less of other impurities. The heat treatments make the metal harder, with out making it brittle with a tensile strength of 181,000 psi. Up to 35% stronger than OE axles.

4340 cromoly steel, is a lower carbon steel with a minimum of 10% chromium by weight. Known as a high strength, low carbon steel with a tensile strength of 228,000 psi opposed to OE standard 1040 steel with a tensile strength of 110,000 to 130,000 psi.

That means they take more punishment, to get you further down the trail or off the trail entirely. That's Nitro Tough.

Nitro also offers extra long-splined shafts which can be cut to length and blank shafts for custom spline machining. Each new product is subjected to multi-point inspections and then actually installed and set up by Nitro's own in-house differential professionals to ensure excellent fitment and easy setup. At Nitro we strive to meet demands for new ratios and Fits and we are continually developing new products to stay ahead of the competition.

CNC precision machining & heat treating processes ensure excellent fitment and overall strength.
Our heat treatment is applied after the splines are cut which allows for deeper penetration where strength is needed.
We have a rapid and ever growing range of products to meet new demands and Fits.



Please contact us with your specific questions and inquiries.



Nitro Gear and Axle Premium Differential Ring and Pinion Gears, Axles and parts


WARNING:

This product can expose you to chemicals including toluene and benzene, which are known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to: www.P65Warnings.ca.gov


Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

Shop by Brand > Nitro Gear & Axle
Products > Axles Shafts & Bearings > Axle Shafts, Rear > Ford > Dana 60
Shop by Brand > Dana Corporation > Dana Ring & Pinion > Dana 60 Series
Products > Axles Shafts & Bearings > Axle Shafts, Rear > Ford > Dana 70 & 80