Chrysler 8.75" 489 Drop-Out Housing 4.56 Nitro Ring & Pinion
Differential:
|
Chrysler 8.75", 489
|
Gear Ratio:
|
4.56
|
Tooth Count:
|
41/9
|
Pinion Splines:
|
29, Fine
|
Ring Gear Bolts:
|
12 (not included)
|
Manufacturer:
|
Nitro Gear & Axle
|
Warranty:
|
2 Years
|
Nitro gears are manufactured from 8620 steel gear forgings in the same manufacturing facilities as GM, Dodge, Ford & Toyota. They are precision machined using computer controlled processes, heat treated, CNC triple-lapped and Rockwell tested for hardness. These extra steps ensure excellent fitment, ideal contact pattern and smooth, quiet operation.

WARNING:
|
This product can expose you to chemicals including toluene and benzene, which are known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to: www.P65Warnings.ca.gov
|
- Vehicle Applications:
- 1960-1974 A Bodies
- 1970-1974 Plymouth Duster
- 1960-1974 Plymouth Valiant
- 1961-1962 Dodge Lancer
- 1964-1974 Plymouth Barracuda
- 1963-1974 Dodge Dart
- 1969-1974 Dodge Dart Swinger
- 1963-1966 Dodge Dart Wagon
- 1971-1972 Dodge Demon
- 1962-1974 B Bodies
- 1962-1964 Plymouth Savoy
- 1968-1974 Plymouth Roadrunner
- 1965-1974 Plymouth Satellite
- 1970 Plymouth Superbird
- 1962-1964 Plymouth Fury
- 1965-1970 Plymouth Belvedere
- 1967-1971 Plymouth GTX
- 1966-1974 Dodge Charger
- 1965-1974 Dodge Coronet
- 1962-1964 Dodge Polara
- 1969 Dodge Charger Daytona
- 1968-1971 Dodge Super Bee
- 1965-1974 C Bodies
- 1965-1974 Plymouth Fury
- 1972-1974 Plymouth Scamp
- 1966-1969 Plymouth VIP
- 1965-1974 Chrysler 300
- 1965-1974 Dodge Polara
- 1965-1974 Dodge Monaco
- 1965-1974 Chrysler Newport
- 1965-1974 Chrysler New Yorker
- 1967-1974 Chrysler Imperial
- 1957-1966 Chrysler Imperial
- D Body
- 1970-1974 E Bodies
- 1970-1974 Plymouth Barracuda
- 1970-1974 Dodge Challenger
- 1971-1974 B100 & B200 Vans
- 1957-1974 D100 & W100 1/2 Ton Pickups
- 1964-1974 A100 Trucks & Vans
- 1967-1974 A108 Trucks & Vans
*All Nitro Gear & Axle brand products are warrantied to be free of manufacturer defects for the specified period. Warranty requests must be made by the original purchaser and submitted by the dealer purchased from. Any parts sent for warranty consideration must be pre-approved and shipped prepaid freight to our facility with copy of RGA for our inspection & determination. We will not pay for labor, shipping cost, loss of revenue or perishable goods, commercial losses, costs of telephone calls, shipping or general inconvenience. This is our only warranty expressed or implied. Unauthorized warranty returns may be refused. Warranty generally covers MFG defects in material or workmanship. Abuse, overloading, improper lubrication, misuse, commercial or competition use voids warranty. Normal characteristics are not warrantable, such as Gear whine. Minor cosmetic flaws, dings, burrs from shipping or manufacturing, are not considered defect, it is installer responsibility to address these at time of install. Customer is responsible for shipping charges if warranty is granted. Warranty is for the original purchaser/user, is not transferable. Warranty covers one replacement or credit solely at our discretion. Warranty determinations are at our sole discretion.
In addition to the above conditions, see special notes for these products:
Ring & Pinion – Warrantied against manufacturing defects. 2 years from date of purchase. Must provide set-up specs.
Chromoly front Axles, Excalibur Joints, 30/30 Birfield kits - Warrantied against manufacturing defects for the life of the vehicle. These products are also covered for Breakage. The Shaft / joint must be BROKEN. Wear, twisting, bending are not warrantable. Damages caused by failure of other parts are not warrantable, for example broken U-joint (other than Nitro Excalibur) causing damage to Axle ears.
Rear Chromoly Axles - Warrantied against manufacturing defects for 5 years. These products are also covered for Breakage. The Shaft must be BROKEN. Worn, twisted, or bent axles are not warrantable.
|