 |
 |
 |
|
Dana 30
without Crush Sleeve
Nitro Front Master Install Kit
Fits:
1966-1971 Ford Bronco
1967-1971 International Scout 800
1971 International Scout 810
1971-1977 International Scout II
1976-1977 International Scout II Traveler
1974-1983 Jeep CJ5
1976-1986 Jeep CJ7
1982-1986 Jeep CJ8 Scrambler
1987-1995 Jeep Wrangler YJ
1984-2000 Jeep Cherokee XJ
1986-1992 Jeep Comanche MJ
|
Differential:
|
Dana 30 Front w/o crush sleeve
|
|
Ring Gear Bolts:
|
10
|
|
Manufacturer:
|
Nitro Gear & Axle
|
Recommended:
3 quarts of
Nitro Synthetic Plus Gear Lube
Tech Note:
For use on Dana 30 without crush sleeve.
Includes Inner Axle Seals.
Kit Contents:
Pinion Bearing & Race x2
Carrier Bearing & Race x2
Pinion Nut x1
Pinion Seal x1
Pinion Nut Washer x1
Pinion Depth Shims
Pinion Preload Shims
Baffle x1
Inner Axle Seals x2
Pinion Inner Slinger x1
Pinion Outer Slinger x1
Ring Gear Bolt x10
Carrier Shims
Gasket x1
Marking Compound x1
Brush x1
Loctite x1
The kits assembled by Nitro Gear & Axle only use the highest quality bearings available from Timken & Koyo. Nitro Gear & Axle does not use any cheap Chinese bearings. By using only Timken & Koyo bearings just like all of the OEM vehicle manufacturers you can be assured that your differential will be reliable, durable, & quiet for years to come.
Nitro Gear & Axle strives to provide the highest quality differential components available. We take the steps necessary to ensure our parts are dependable. Our product range is continually growing to meet the needs of consumers for new ratios and Fits. At Nitro, we know differentials and know what it takes to provide you with high quality components.
The Dana 30 Trademark referred to herein is a trademark of Dana Limited. The Dana 30 Trademarks is used for informational purposes only, and there is no connection between Nitro Gear & Axle or JT's Parts & Accessories and Dana®.
- 1967-1971 International Scout 800
- 1971 International Scout 810
- 1971-1977 International Scout II
- 1976-1977 International Scout II Traveler
- 1974-1983 Jeep CJ5
- 1976-1986 Jeep CJ7
- 1982-1986 Jeep CJ8 Scrambler
- 1987-1995 Jeep Wrangler YJ
- 1984-2000 Jeep Cherokee XJ
- 1986-1992 Jeep Comanche MJ
*All Nitro Gear & Axle brand products are warrantied to be free of manufacturer defects for the specified period. Warranty requests must be made by the original purchaser and submitted by the dealer purchased from. Any parts sent for warranty consideration must be pre-approved and shipped prepaid freight to our facility with copy of RGA for our inspection & determination. We will not pay for labor, shipping cost, loss of revenue or perishable goods, commercial losses, costs of telephone calls, shipping or general inconvenience. This is our only warranty expressed or implied. Unauthorized warranty returns may be refused. Warranty generally covers MFG defects in material or workmanship. Abuse, overloading, improper lubrication, misuse, commercial or competition use voids warranty. Normal characteristics are not warrantable, such as Gear whine. Minor cosmetic flaws, dings, burrs from shipping or manufacturing, are not considered defect, it is installer responsibility to address these at time of install. Customer is responsible for shipping charges if warranty is granted. Warranty is for the original purchaser/user, is not transferable. Warranty covers one replacement or credit solely at our discretion. Warranty determinations are at our sole discretion.
In addition to the above conditions, see special notes for these products:
Ring & Pinion – Warrantied against manufacturing defects. 2 years from date of purchase. Must provide set-up specs.
Chromoly front Axles, Excalibur Joints, 30/30 Birfield kits - Warrantied against manufacturing defects for the life of the vehicle. These products are also covered for Breakage. The Shaft / joint must be BROKEN. Wear, twisting, bending are not warrantable. Damages caused by failure of other parts are not warrantable, for example broken U-joint (other than Nitro Excalibur) causing damage to Axle ears.
Rear Chromoly Axles - Warrantied against manufacturing defects for 5 years. These products are also covered for Breakage. The Shaft must be BROKEN. Worn, twisted, or bent axles are not warrantable.
|
|
|
 |
|
 |
|
|
|
Excellent kit 
