3.08 Nitro Ring & Pinion
for Dana 44
|
Differential:
|
Dana Spicer Model 44
|
|
Gear Ratio:
|
3.08
|
|
Tooth Count:
|
43/14
|
|
Pinion Splines:
|
26
|
|
Ring Gear Bolts:
|
10 (not included)
|
|
Manufacturer:
|
Nitro Gear & Axle
|
|
Warranty:
|
2 Years
|
Nitro gears are manufactured from 8620 steel gear forgings in the same manufacturing facilities as GM, Dodge, Ford & Toyota. They are precision machined using computer controlled processes, heat treated, CNC triple-lapped and Rockwell tested for hardness. These extra steps ensure excellent fitment, ideal contact pattern and smooth, quiet operation.
|
 WARNING:
|
This product can expose you to chemicals including toluene and benzene, which are known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to: www.P65Warnings.ca.gov
|
- Vehicle Applications:
- 1971 IHC International Scout II
1972 IHC International Scout II
1973 IHC International Scout II
1974 IHC International Scout II
1975 IHC International Scout II
1976 IHC International Scout II
1977 IHC International Scout II
1978 IHC International Scout II
1979 IHC International Scout II
1980 IHC International Scout II
- 1970 Jeep J10 & J20 Pickup
1971 Jeep J10 & J20 Pickup
1972 Jeep J10 & J20 Pickup
1973 Jeep J10 & J20 Pickup
1974 Jeep J10 & J20 Pickup
1975 Jeep J10 & J20 Pickup
1976 Jeep J10 & J20 Pickup
1977 Jeep J10 & J20 Pickup
1978 Jeep J10 & J20 Pickup
1979 Jeep J10 & J20 Pickup
1980 Jeep J10 & J20 Pickup
1981 Jeep J10 & J20 Pickup
1982 Jeep J10 & J20 Pickup
1983 Jeep J10 & J20 Pickup
1984 Jeep J10 & J20 Pickup
1985 Jeep J10 & J20 Pickup
1986 Jeep J10 & J20 Pickup
- 1974-1985 Jeep Wagoneer FSJ
- 1975-1985 Jeep Cherokee FSJ
- 1986-1992 Jeep Grand Wagoneer FSJ
- 1967-1980 Chevy & GMC K10 4x4 Pickup
- 1967-1980 Chevy & GMC K20 4x4 Pickup
- 1969-1980 Chevy K5 Blazer 4x4
- 1970-1980 GMC K5 Jimmy 4x4
- 1967-1993 Dodge W100 & W150 4x4 Pickup
- 1967-1984 Dodge W200 & W250 4x4 Pickup
- 1994-2001 Dodge Ram W1500 4x4 Pickup
- 1994-1997 Dodge Ram W2500 4x4 Pickup (5.2L & 5.9L V8 only)
- 1974-1993 Dodge Ramcharger
- 1974-1981 Plymouth Trailduster
- 1972-1977 Ford Bronco
*All Nitro Gear & Axle brand products are warrantied to be free of manufacturer defects for the specified period. Warranty requests must be made by the original purchaser and submitted by the dealer purchased from. Any parts sent for warranty consideration must be pre-approved and shipped prepaid freight to our facility with copy of RGA for our inspection & determination. We will not pay for labor, shipping cost, loss of revenue or perishable goods, commercial losses, costs of telephone calls, shipping or general inconvenience. This is our only warranty expressed or implied. Unauthorized warranty returns may be refused. Warranty generally covers MFG defects in material or workmanship. Abuse, overloading, improper lubrication, misuse, commercial or competition use voids warranty. Normal characteristics are not warrantable, such as Gear whine. Minor cosmetic flaws, dings, burrs from shipping or manufacturing, are not considered defect, it is installer responsibility to address these at time of install. Customer is responsible for shipping charges if warranty is granted. Warranty is for the original purchaser/user, is not transferable. Warranty covers one replacement or credit solely at our discretion. Warranty determinations are at our sole discretion.
In addition to the above conditions, see special notes for these products:
Ring & Pinion – Warrantied against manufacturing defects. 2 years from date of purchase. Must provide set-up specs.
Chromoly front Axles, Excalibur Joints, 30/30 Birfield kits - Warrantied against manufacturing defects for the life of the vehicle. These products are also covered for Breakage. The Shaft / joint must be BROKEN. Wear, twisting, bending are not warrantable. Damages caused by failure of other parts are not warrantable, for example broken U-joint (other than Nitro Excalibur) causing damage to Axle ears.
Rear Chromoly Axles - Warrantied against manufacturing defects for 5 years. These products are also covered for Breakage. The Shaft must be BROKEN. Worn, twisted, or bent axles are not warrantable.
|
