Home > Shop by Brand > Nitro Gear & Axle >

Nitro Master Install Kit, Rear for Dana 60 & 61
Nitro Master Install Kit

Price: $263.00

Price with Selected Options: $263.00

Product Code: MKD60

Nitro Gear Oil:

Description Vehicle Applications Warranty Information

Dana Model 60 & Dana 61
Nitro Rear Master Install Kit

1967-1969 Ford F100 1/2 Ton Pickup Dana 60 Rear
1967-1985 Ford F250 3/4 Ton Pickup Dana 60 Rear
1983 Ford F350 1 Ton Pickup Dana 60 Rear
1968-1975 Ford E300 Van Dana 60 Rear
1967-1977 Ford P350 Delivery Van Dana 60 Rear
1980-2001 Ford E250 Van Dana 60 Rear
1988-2001 Ford E350 Van Dana 60 Rear
1968-1977 Chrysler 'B' Body with Hemi or 440 Dana 60 Rear
1969-1978 Chrysler 'E' Body with Hemi or 440 Dana 60 Rear
1970-2001 Dodge B300 1 Ton Van and MotoRight Handome Dana 60 Rear
1967-1993 Dodge D200 W200 D250 W250 3/4 Ton Dana 60 Front or Rear
1994-2002 Dodge D2500 W2500 with 5.2L or 5.9L V8 Dana 60 Front or Rear
1975-2002 Dodge W300 W350 W3500 1 Ton Pickup Dana 60 Front
1968-1970 Chevy C10 Pickup Dana 60 Rear
1968-1972 Chevy C20 C25 K25 3/4 Ton Pickup Dana 60 Rear
1977-1991 Chevy GMC K30 V30 1 ton Pickup Dana 60 Front
1973-1991 Chevy & GMC G30 G300 1 Ton Van Dana 60 Rear
1967-1975 International1000 1100 1200 Pickup & Wagon Dana 60 Rear
1969-1988 Jeep J20 3/4 Ton Pickup Dana 60 Rear
1978-1979 Ford F250 F350 Snowfighter & Super Cab Dana 60 Front or Rear
1985-1998 Ford F350 Pickup Dana 60 Front
1999-2001 Ford F350 Superduty DRW Dually Dana 60 Front
2002-2009 Ford F250 & F350 Superduty SRW & DRW Dana 60 Front
Tera 60 60R
Dynatrac Pro Rock 60
Currie Rock Jock 60
Rockcrusher 60R
Solid Axle Ind. 60

Differential: Dana Model 60 & Dana 61
Gear Ratio: All Ratios
Ring Gear Bolts: 12 (included)
Manufacturer: Nitro Gear & Axle

4 quarts of Nitro Synthetic Plus Gear Lube

Kit Contents:
Pinion Bearing & Race x2
Carrier Bearing & Race x2
Pinion Nut x1
Pinion Nut Washer x1
Pinion Seal x1
Pinion Depth Shims
Pinion Preload Shims
Inner Slinger x1
Outer Slinger x1
Carrier Side Shims
Ring Gear Bolts x12
Gasket x1
Crush Sleeve s1
Marking Compound x1
Brush x1
Loctite x1

The kits assembled by Nitro Gear & Axle only use the highest quality bearings available from Timken & Koyo. Nitro Gear & Axle does not use any cheap Chinese bearings. By using only Timken & Koyo bearings just like all of the OEM vehicle manufacturers you can be assured that your differential will be reliable, durable, & quiet for years to come.

Nitro Gear and Axle Premium Differential Ring and Pinion Gears, Axles and parts

Nitro Gear & Axle strives to provide the highest quality differential components available. We take the steps necessary to ensure our parts are dependable. Our product range is continually growing to meet the needs of consumers for new ratios and Fits. At Nitro, we know differentials and know what it takes to provide you with high quality components.

The Dana 60 & Dana 61 Trademarks referred to herein is a trademark of Dana Limited. The Dana 60 & Dana 61 Trademarks is used for informational purposes only, and there is no connection between Nitro Gear & Axle or JT's Parts & Accessories and Dana .


This product can expose you to chemicals including toluene and benzene, which are known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to: www.P65Warnings.ca.gov

Average Rating: Average Rating: 4 of 5 4 of 5 Total Reviews: 1 Write a review »

80W-140 Nitro Para-Synthetic Plus Gear Oil, GL5 (1 Quart)
Price: $22.50

80W-140 Nitro Para-Synthetic Plus Gear Oil

  0 of 0 people found the following review helpful:
4 of 5 not all parts were there for pinion installation October 4, 2018
Reviewer: Neil Gomez from Chandler, AZ United States  
The shims were missing from the kit to set pinion depth between the large bearing and the pinion. Other than that it is a great kit.

Was this review helpful to you?

Browse for more products in the same category as this item:

Shop by Brand > Nitro Gear & Axle
Products > Install Kits > Master Install Kit > Dana Spicer > Dana 60