Ford 8.8" Solid Axle
Nitro Helix-Helical Gear Limited-Slip Differential
Fits: 1983-1996 Ford Bronco
1983"2014 Ford E-150 Van 1/2 Ton
1983-1998 Ford E-250 Van 3/4 Ton
1997-2006 Ford Expedition
1991-1994 Mazda Navajo
1991-2010 Ford Explorer
2001-2010 Ford Explorer Sport Trac
1997-2010 Mercury Mountaineer
2003-2005 Lincoln Aviator
1983-2014 Ford F-150 1/2 Ton
1994-2014 Ford Mustang (Most Mustang used 28 Spline)
2003-2007 Ford Ranger FX4 Level II
Differential:
|
8.8" (non-IRS)
|
Gear Ratio:
|
All
|
Axle Splines:
|
31 (c-clip)
|
Ring Gear Bolts:
|
10 (not included)
|
Manufacturer:
|
Nitro Gear & Axle
|
Warranty:
|
1 Year
|
You'll want to check out this article on Overland Journal/Expedition Portal about the
benefits of installing a Nitro locker.
Recommended: 3 quarts of
Nitro Synthetic Plus Gear Lube
The Nitro Helix-Helical Gear Gear is a torque-sensitive mechanical limited-slip differential that uses Helix-Helical Gears and spur gears to dispense and distinguish input power between two drive wheels or front and back axles. This is a completely separate design from the common beveled spider gear designs seen in most of the automotive industry.
Just like any LSD, the Nitro Helix-Helical Gear Gear functions as a standard or open differential under normal driving conditions, allowing one wheel to spin faster or slower as necessary. When a wheel experiences a loss of traction, the gear separation forces start to take effect and distributes the torque to the high-traction wheel by increasing the helical-shaped gears mesh force until wheel spin is reduced or entirely stopped. Once the vehicle exits the low traction condition, the differential resumes normal operation.
What's nice about the operation of a Nitro Helix-Helical Gear Gear LSD, is its characteristics; smooth, quiet and automatic. This LSD will engage without any driver awareness or require any action. It also has no wearable components and requires no maintenance, producing less time on the rack and more on the road.

Nitro Gear & Axle strives to provide the highest quality differential & axle components available. We take the steps necessary to ensure our parts are dependable. Our product range is continually growing to meet the needs of consumers for new ratios and Fits. At Nitro we know differentials, and know what it takes to provide you with high quality components.
WARNING:
|
This product can expose you to chemicals including toluene and benzene, which are known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to: www.P65Warnings.ca.gov
|
- 1983 – 1996 Ford Bronco
- 1983 – 2011 Ford Crown Victoria
- 1983 – 1983 Ford E-100 1/2 Ton
- 1983 – 2014 Ford E-150 1/2 Ton
- 1983 – 1998 Ford E-250 3/4 Ton
- 1997 – 2001 Ford Expedition
- 1991 – 2001 Ford Explorer
- 2001 – 2010 Ford Explorer Sport Trac
- 1983 – 2009 Ford F-150 1/2 Ton
- 1978 – 1983 Ford Fairmont
- 1979 – 1982 Ford Granada
- 1979 – 1991 Ford LTD
- 1979 – 2009 Ford Mustang
- 1990 – 2011 Ford Ranger
- 1987 – 1988 Ford Thunderbird
- 2003 – 2005 Lincoln Aviator
- 1979 – 2000 Lincoln Continental
- 2006 – 2008 Lincoln Mark LT
- 1980 – 1983 Lincoln Mark VI
- 1984 – 1992 Lincoln Mark Vll
- 1998 – 2002 Lincoln Navigator
- 1981 – 2011 Lincoln Town Car
- 1994 – 2002 Mazda B3000
- 1994 – 2007 Mazda B4000
- 1991 – 1994 Mazda Navajo
- 1979 – 1986 Mercury Capri
- 1979 – 1988 Mercury Cougar
- 1975 – 2011 Mercury Grand Marquis
- 2003 – 2004 Mercury Marauder
- 1997 – 2010 Mercury Mountaineer
*All Nitro Gear & Axle brand products are warrantied to be free of manufacturer defects for the specified period. Warranty requests must be made by the original purchaser and submitted by the dealer purchased from. Any parts sent for warranty consideration must be pre-approved and shipped prepaid freight to our facility with copy of RGA for our inspection & determination. We will not pay for labor, shipping cost, loss of revenue or perishable goods, commercial losses, costs of telephone calls, shipping or general inconvenience. This is our only warranty expressed or implied. Unauthorized warranty returns may be refused. Warranty generally covers MFG defects in material or workmanship. Abuse, overloading, improper lubrication, misuse, commercial or competition use voids warranty. Normal characteristics are not warrantable, such as Gear whine. Minor cosmetic flaws, dings, burrs from shipping or manufacturing, are not considered defect, it is installer responsibility to address these at time of install. Customer is responsible for shipping charges if warranty is granted. Warranty is for the original purchaser/user, is not transferable. Warranty covers one replacement or credit solely at our discretion. Warranty determinations are at our sole discretion.
In addition to the above conditions, see special notes for these products:
Ring & Pinion – Warrantied against manufacturing defects. 2 years from date of purchase. Must provide set-up specs.
Chromoly front Axles, Excalibur Joints, 30/30 Birfield kits - Warrantied against manufacturing defects for the life of the vehicle. These products are also covered for Breakage. The Shaft / joint must be BROKEN. Wear, twisting, bending are not warrantable. Damages caused by failure of other parts are not warrantable, for example broken U-joint (other than Nitro Excalibur) causing damage to Axle ears.
Rear Chromoly Axles - Warrantied against manufacturing defects for 5 years. These products are also covered for Breakage. The Shaft must be BROKEN. Worn, twisted, or bent axles are not warrantable.
|