/* Light YouTube Embeds by @labnol */

  Home > Products > Axles Shafts & Bearings > Axle Shafts, Rear > Ford > Ford 8" >

Ford 8" & 9", Small Bearing Triple-Drilled, Nitro Rear Cut To Length Axle Shaft
8" & 9" Ford 28 Spline W Small Bearing (Rw207) 23.5"-32.87" Ctl5X4.5, 5X4.75, 5X5


 
Alternative Views:


Cut-to-Length Axle
Price: $146.95


Product Code: AXF8-28-32.87
Qty:

Description Warranty Information
 

Ford 8" & 9"
Cut-to-Length Axle

Fits:
1959 Edsel Corsair
1959-1960 Edsel Ranger
1959-1960 Edsel Villager
1963 Ford 300
1957-1959 Ford Club
1957-1967 Ford Country Sedan
1957-1967 Ford Country Squire
1957-1960 Ford Courier Sedan Delivery
1957 Ford Custom
1964-1967 Ford Custom
1957-1960 Ford Custom 300
1966-1967 Ford Custom 500
1957-1958 Ford Del Rio Wagon
1969-1974 Ford E-100 Econoline
1961-1967 Ford Econoline
1957-1970 Ford Fairlane
1963-1970 Ford Falcon
1959-1967 Ford Galaxie
1962-1967 Ford Galaxie 500
1972 Ford Grand Torino
1975-1980 Ford Granada
1964-1969 Ford GT 40
1965-1967 Ford LTD
1970-1977 Ford Maverick
1964-1973 Ford Mustang
1974-1978 Ford Mustang II
1974-1980 Ford Pinto
1957-1967 Ford Ranch Wagon
1957-1959 Ford Skyliner
1963-1964 Ford Sprint
1960 Ford Starliner
1962-1965 Ford Station Bus
1957-1960 Ford Sunliner
1961 Ford Thunderbird
1968-1972 Ford Torino
1957-1960 Ford Victoria
1972 Lincoln Mark IV
1978-1979 Lincoln Versailles
1975-1980 Mercury Bobcat
1966-1967 Mercury Capri
1961-1965 Mercury Colony Park
1966-1969 Mercury Comet
1971-1977 Mercury Comet
1965 Mercury Commuter
1961-1963 Mercury Commuter
1967-1973 Mercury Cougar
1963 Mercury Country Cruiser
1965-1971 Mercury Cyclone
1963 Mercury Marauder
1965 Mercury Marauder
1961-1963 Mercury Meteor
1975-1980 Mercury Monarch
1965 Mercury Montclair
1968-1972 Mercury Montego
1961-1965 Mercury Monterey
1965 Mercury Park Lane
1964-1967 Mercury Villager
1966-1967 Mercury Voyager



Differential: Ford 8" & 9"
Length: 23.5"-32.87" Cut-to-Length
Axle Splines: 28
Type: Semi Float
Bolt Pattern: 5 x 4.5", 5 x 4.75", 5 x 5"
Material: 1541h Steel
Manufacturer: Nitro Gear & Axle
Warranty: 5 Years*


Related Parts:
Wheel bearing “large" 3.150" O.D. AKF9-NITRO
Wheel bearing "small" 2.890" O.D. BCARW207CCRA
Retainer plates: FORF900120, FORF900122 or FORF900123.


Nitro Gear & Axle now offers an assortment of Heavy Duty Cut-to-Length (CTL) rear axle shafts. The CTL axle shafts feature extra Long splines and can easily be cut to the desired length with a chop saw. This allows Nitro to use stronger rolled splines rather than cut splines and allows fewer part numbers to cover a wide range of OE and custom Fits. This also makes it easier for Offroad, restoration, and Rod Shops to stock axles since they fit so many Fits.


Nitro Gear & Axle strives to provide the highest quality differential & axle components available. We take the steps necessary to ensure our parts are dependable. Our product range is continually growing to meet the needs of consumers for new ratios and Fits. At Nitro, we know differentials and know what it takes to provide you with high quality components.


Nitro Gear and Axle Premium Differential Ring and Pinion Gears, Axles and parts
Features:
  • Nitro axles are heat treated after splines are cut. Most custom axles have the splines cut after heat treating, removing heat treated metal from the spline section of the shaft.
  • Trim to desired length.
  • Triple-drilled wheel pattern to fit a wide variety of applications.
  • Eliminates the cost and need for custom Axles!
Average Rating: Average Rating: 4.5 of 5 4.5 of 5 Total Reviews: 4 Write a review »


  0 of 0 people found the following review helpful:
 
5 of 5 axle May 7, 2017
Reviewer: JOHN Ferguson from Saxton, PA United States  
The axle was better than description  very well made and finished , very satisfied

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 Cut to length axles April 9, 2016
Reviewer: Mike Parent from Dixfield, ME United States  
They look very nice and strong, I would recommend these. I would like to see the hub diamiter at 6 1/8 so it would fit stock rotors, I have to have the hub turned down to fit my rotors, not a big deal but is inconvenient and a unforeseen added cost. Overall very satisfied. Thank you Mike

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 ford 8&9 inch cut to length axles July 21, 2015
Reviewer: Dale Dutton  
I was very pleased with the service and sales staff, free shipping was nice I would buy from them again.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 Great product May 16, 2015
Reviewer: James Nobbe from Winneconne, WI United States  
Well engineered product

Was this review helpful to you?


Browse for more products in the same category as this item:

Products > Axles Shafts & Bearings > Axle Shafts, Rear > Ford > Ford 8"
Products > Axles Shafts & Bearings > Axle Shafts, Rear > Ford > Ford 9"
Shop by Brand > Nitro Gear & Axle