 |
 |
 |
 |
Ford 9" Rear Axle
Nitro Complete Axle Housing End Kit
Fits: 1966-1986 Ford Bronco 1968-1983 Ford E-100 1/2 Ton 1979-1988 Ford E-150 1/2 Ton 1975-1980 Ford E-250 3/4 Ton 1968-1974 Ford E200 3/4 Ton 1957-1983 Ford F-100 1/2 Ton 1968-1987 Ford F-150 1/2 Ton 1957-1971 Ford Fairlane 1960-1970 Ford Falcon 1959-1974 Ford Galaxie 1975-1979 Ford Granada 1965-1979 Ford LTD 1970-1978 Ford Maverick 1965-1973 Ford Mustang 1957-1979 Ford Ranchero 1955-1979 Ford Thunderbird 1968-1976 Ford Torino / Grand Torino 1957-1979 Lincoln Continental 1968-1971 Lincoln Lincoln Mark III 1964-1977 Mercury Comet 1967-1979 Mercury Mercury Cougar 1975-1980 Mercury Grand Marquis
Differential:
|
Ford 9"
|
Gear Ratio:
|
All Ratios
|
Manufacturer:
|
Nitro
|
3/8" bolt holes, uses 'Big' bearing 3.150" O.D.
AKF9-NITRO
Includes:
weld-on ends x2 retainer plates x2 t-bolts x8 nuts x8
Nitro Gear & Axle strives to provide the highest quality differential components available. We take the steps necessary to ensure our parts are dependable. Our product range is continually growing to meet the needs of consumers for new ratios and Fits. At Nitro we know differentials, and know what it takes to provide you with high quality components.

WARNING:
|
This product can expose you to chemicals including toluene and benzene, which are known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to: www.P65Warnings.ca.gov
|
- 1966-1986 Ford Bronco
1968-1983 Ford E-100 1/2 Ton 1979-1988 Ford E-150 1/2 Ton 1975-1980 Ford E-250 3/4 Ton 1968-1974 Ford E200 3/4 Ton 1957-1983 Ford F-100 1/2 Ton 1968-1987 Ford F-150 1/2 Ton 1957-1971 Ford Fairlane 1960-1970 Ford Falcon 1959-1974 Ford Galaxie 1975-1979 Ford Granada 1965-1979 Ford LTD 1970-1978 Ford Maverick 1965-1973 Ford Mustang 1957-1979 Ford Ranchero 1955-1979 Ford Thunderbird 1968-1976 Ford Torino / Grand Torino 1957-1979 Lincoln Continental 1968-1971 Lincoln Lincoln Mark III 1964-1977 Mercury Comet 1967-1979 Mercury Mercury Cougar 1975-1980 Mercury Grand Marquis
*All Nitro Gear & Axle brand products are warrantied to be free of manufacturer defects for the specified period. Warranty requests must be made by the original purchaser and submitted by the dealer purchased from. Any parts sent for warranty consideration must be pre-approved and shipped prepaid freight to our facility with copy of RGA for our inspection & determination. We will not pay for labor, shipping cost, loss of revenue or perishable goods, commercial losses, costs of telephone calls, shipping or general inconvenience. This is our only warranty expressed or implied. Unauthorized warranty returns may be refused. Warranty generally covers MFG defects in material or workmanship. Abuse, overloading, improper lubrication, misuse, commercial or competition use voids warranty. Normal characteristics are not warrantable, such as Gear whine. Minor cosmetic flaws, dings, burrs from shipping or manufacturing, are not considered defect, it is installer responsibility to address these at time of install. Customer is responsible for shipping charges if warranty is granted. Warranty is for the original purchaser/user, is not transferable. Warranty covers one replacement or credit solely at our discretion. Warranty determinations are at our sole discretion.
In addition to the above conditions, see special notes for these products:
Ring & Pinion – Warrantied against manufacturing defects. 2 years from date of purchase. Must provide set-up specs.
Chromoly front Axles, Excalibur Joints, 30/30 Birfield kits - Warrantied against manufacturing defects for the life of the vehicle. These products are also covered for Breakage. The Shaft / joint must be BROKEN. Wear, twisting, bending are not warrantable. Damages caused by failure of other parts are not warrantable, for example broken U-joint (other than Nitro Excalibur) causing damage to Axle ears.
Rear Chromoly Axles - Warrantied against manufacturing defects for 5 years. These products are also covered for Breakage. The Shaft must be BROKEN. Worn, twisted, or bent axles are not warrantable.
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features:
- 3/8" bolt holes
- Uses 'Big' bearing 3.150” O.D. AKF9-NITRO
- Weld-on ends
- All necessary hardware
|
|
 |
 |
 |
 |
|
 |

|