GM 9.5"
Semi Float
Nitro Rear Master Install Kit
Fits:
2002-2013 Chevrolet Avalanche 1500
2002-2006 Chevrolet Avalanche 2500
1998-1999 Chevrolet C1500
1998-2000 Chevrolet C2500
1998-2015 Chevrolet Express Van 1500
1998-2013 Chevrolet Express Van 2500
2010-2014 Chevrolet Express Van 3500
1998-1999 Chevrolet K10/K1500
1998-2000 Chevrolet K20/K2500
1999-2013 Chevrolet Silverado 1500|2500
2001-2007 Chevrolet Silverado 1500HD
2003-2006 Chevrolet SSR
1998-2013 Chevrolet Suburban 1500|2500
1998-2013 Chevrolet Tahoe 1500
1998-1999 GMC C1500
1998-2000 GMC C2500
1998-1999 GMC K15/K1500
1998-2000 GMC K25/K2500
1998-2013 GMC Savana 2500
2010-2014 GMC Savana 3500
1998-2013 GMC Sierra 1500
2001-2017 GMC Sierra 1500HD
1999-2013 GMC Sierra 2500
1998-2013 GMC Denali
1997-2000 GMC Suburban 1/2 Ton and 3/4 Ton
1998-2013 GMC Yukon 1500|2500
2000-2013 GMC Yukon XL 1500
1998-2013 GMC Yukon XL 2500
2002-2009 Hummer h3
2008-2008 Saab 9-7x
Differential:
|
GM 9.5"
|
Ring Gear Bolts:
|
12 (included)
|
Manufacturer:
|
Nitro Gear & Axle
|
Recommended:
3 quarts of
Nitro Synthetic Plus Gear Lube
Tech Note:
1998 & Newer models
Kit Includes:
Pinion Bearing & Race x2
Carrier Bearing & Race x2
Pinion Nut x1
Pinion Seal x1
Pinion Shims
Carrier Shims
Crush Sleeve x1
Ring Gear Bolt x12
Gasket x1
Marking Compound x1
Brush x1
Loctite x1
The kits assembled by Nitro Gear & Axle only use the highest quality bearings available from Timken & Koyo. Nitro Gear & Axle does not use any cheap Chinese bearings. By using only Timken & Koyo bearings just like all of the OEM vehicle manufacturers you can be assured that your differential will be reliable, durable, & quiet for years to come.

Nitro Gear & Axle strives to provide the highest quality differential components available. We take the steps necessary to ensure our parts are dependable. Our product range is continually growing to meet the needs of consumers for new ratios and Fits. At Nitro we know differentials, and know what it takes to provide you with high quality components.
WARNING:
|
This product can expose you to chemicals including toluene and benzene, which are known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to: www.P65Warnings.ca.gov
|
*All Nitro Gear & Axle brand products are warrantied to be free of manufacturer defects for the specified period. Warranty requests must be made by the original purchaser and submitted by the dealer purchased from. Any parts sent for warranty consideration must be pre-approved and shipped prepaid freight to our facility with copy of RGA for our inspection & determination. We will not pay for labor, shipping cost, loss of revenue or perishable goods, commercial losses, costs of telephone calls, shipping or general inconvenience. This is our only warranty expressed or implied. Unauthorized warranty returns may be refused. Warranty generally covers MFG defects in material or workmanship. Abuse, overloading, improper lubrication, misuse, commercial or competition use voids warranty. Normal characteristics are not warrantable, such as Gear whine. Minor cosmetic flaws, dings, burrs from shipping or manufacturing, are not considered defect, it is installer responsibility to address these at time of install. Customer is responsible for shipping charges if warranty is granted. Warranty is for the original purchaser/user, is not transferable. Warranty covers one replacement or credit solely at our discretion. Warranty determinations are at our sole discretion.
In addition to the above conditions, see special notes for these products:
Ring & Pinion – Warrantied against manufacturing defects. 2 years from date of purchase. Must provide set-up specs.
Chromoly front Axles, Excalibur Joints, 30/30 Birfield kits - Warrantied against manufacturing defects for the life of the vehicle. These products are also covered for Breakage. The Shaft / joint must be BROKEN. Wear, twisting, bending are not warrantable. Damages caused by failure of other parts are not warrantable, for example broken U-joint (other than Nitro Excalibur) causing damage to Axle ears.
Rear Chromoly Axles - Warrantied against manufacturing defects for 5 years. These products are also covered for Breakage. The Shaft must be BROKEN. Worn, twisted, or bent axles are not warrantable.