MILE MARKER
12V 9500 LB WINCH
100' 3/8" CABLE
INCL ROLLER FAIRLEAD & INTEGRATED SOLENOIDS

Specs:

• Rated Line Pull: 9500 lbs. (4309 kgs)
• Gear Train: 3 Stage Planetary
• Gear Reduction Ratio: 212:1
• Motor: Series Wound 4.6hp, 12V
• Cable: 3/8" x 100' Galvanized aircraft cable
• Drum Size: Diameter / Length 2.5" / 9"
• Weight: 92 lbs
• Bolt Pattern: 4 Bolt Pattern, 4.5" x 10"
• Overall dimension (Length / Width / Height): 22.25" x 6.25" x 8.00"

Heavy Duty Series Wound Motors and rugged planetary gear sets are the backbone of this expedition grade winch series. The Mile Marker SI9500 offers a one piece winch and solenoid combination for a finished look and simplified installation. This powerful one piece winch offers 100 feet of 3/8” cable and Mile Marker’s load holding brake system; making this extreme off-road winch unmatched in performance and value. Shop now and experience reliable and heavy-duty performance with Mile Marker SI9500 Electric Winch.

Mile Marker Industries Electric Winch Limited 2-Year Warranty
Mile Marker, Industries offers a limited two (2) year warranty to the original retail purchaser for each new Mile Marker electric winch, used as a recreational recovery winch only, against manufacturing defects in workmanship and materials on all mechanical components. Electrical components consisting of motors, solenoids, wiring, wire connectors and associated parts have a limited one (1) year warranty. New cable assemblies are warranted against defects in workmanship and materials when received by the retail purchaser. There is no applicable warranty after initial use. Excluded from this warranty are the finish of the winch and any condition Mile Marker determines to have been caused by misuse or abnormal use. Warranty registration cards for each winch must be submitted at the time of purchase or within 30 days by the end user. Registration cards must reference winch serial number to be valid. Warranty will only be valid for the original purchaser of the winch and installed on the vehicle for which it was originally registered. The owner will be responsible for removing the winch and returning it to Mile Marker freight prepaid unless a determination is made that replacement parts can be sent out which will remedy the problem. Mile Marker will repair or replace any or all winch parts, which after inspection determines to be defective. If the product was purchased in the United States, the owner must contact our warranty department to get a Return Goods Authorization (RGA) Number before returning the product. If the product was purchased outside the United States, the owner must return the product to the original place of purchase.