 |
 |
 |
|
GM 8.6" 10 bolt
Nitro Rear Aluminum, Increased Capacity
Differential Girdle Cover
|
Differential:
|
GM 8.6" Rear Only
|
|
Material:
|
356-T6 Aircraft Grade Aluminum
|
|
Differential Bolts:
|
10 included
|
|
Manufacturer:
|
Nitro Gear & Axle
|
|
Warranty:
|
1 year*
|
Made in the USA
Nitro Aluminum differential covers are extremely thick and have been thoroughly tested in Moab, King of Hammers, and numerous other locations, proving they will handle the rocks, roots, stumps, and anything else you can throw at them. Finned aluminum dissipates heat faster than steel reducing the operating temperature inside your differential and extending the life of your components. Aluminum can't rust and a Nitro aluminum differential cover will keep your undercarriage looking great all year round. Our wide selection of available covers makes it possible to equip both the front and rear differentials with Nitro covers on many vehicles.
|
 WARNING:
|
This product can expose you to chemicals including toluene and benzene, which are known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to: www.P65Warnings.ca.gov
|
- 1973 - 1975 Buick Apollo
- 1971 - 1989 Buick Electra
- 2004 - 2007 Buick Rainier
- 1973 - 1987 Buick Regal
- 1975 - 1978 Buick Riviera
- 1970 - 1972 Buick Skylark
- 1999 - 2000 Cadillac Escalade
- 2002 - 2008 Chevrolet Avalanche 1500
- 1964 - 1972 Chevrolet Bel Air
- 1964 - 1972 Chevrolet Biscayne
- 1979 - 1994 Chevrolet Blazer
- 1979 - 1987 Chevrolet C10 1/2 Ton 2WD
- 1988 - 1990 Chevrolet C1500 1/2 Ton 2WD
- 1989 - 2000 Chevrolet C2500 3/4 Ton 2WD
- 1967 - 1970 Chevrolet Camaro
- 1965 - 1971 Chevrolet Caprice
- 1965 - 1971 Chevrolet Chevelle
- 1964 - 1972 Chevrolet Malibu
- 1964 - 1968 Chevrolet Chevy II
- 2004 - 2008 Chevrolet Colorado
- 1964 - 1972 Chevrolet El Camino
- 1996 - 2003 Chevrolet Express Van 1500 1/2 Ton
- 1979 - 1989 Chevrolet G10 1/2 Ton
- 1975 - 1989 Chevrolet G20 3/4 Ton
- 1964 - 1972 Chevrolet Impala
- 1979 - 1988 Chevrolet K10/ K1500 1/2 Ton 4WD
- 1979 - 1991 Chevrolet K5 Blazer 4WD
- 1973 - 1983 Chevrolet Malibu
- 1970 - 1972 Chevrolet Monte Carlo
- 1968 - 1972 Chevrolet Nomad
- 1964 - 1972 Chevrolet Nova
- 1994 - 2000 Chevrolet S10 Blazer
- 1994 - 2000 Chevrolet S10 Pickup
- 1999 - 2008 Chevrolet Silverado 1500 1/2 Ton
- 2003 - 2006 Chevrolet SSR
- 1979 - 1991 Chevrolet Suburban 1/2 Ton
- 1995 - 1998 Chevrolet Tahoe 1500 1/2 Ton
- 1999 - 2008 Chevrolet Trailblazer
- 1979 - 1990 GMC C15/ C1500 1/2 Ton 2WD
- 1997 - 2000 GMC C25/ C2500 3/4 Ton 2WD
- 2004 - 2008 GMC Canyon
- 2002 - 2008 GMC Envoy
- 1979 - 1988 GMC G15/ G1500 1/2 Ton
- 1978 - 1988 GMC G25/ G2500 3/4 Ton
- 1979 - 1988 GMC K15/ K1500 1/2 Ton 4WD
- 1994 - 2000 GMC S15 Jimmy
- 1994 - 2000 GMC S15 Pickup
- 1996 - 2003 GMC Savana 1500 1/2 Ton
- 1996 - 1998 GMC Savana 2500 3/4 Ton
- 1999 - 2008 GMC Sierra 1500 1/2 Ton
- 1999 - 2008 GMC Sierra Denali
- 1994 - 1998 GMC Sonoma
- 1979 - 1991 GMC Suburban 1/2 Ton
- 1992 - 1993 GMC Typhoon
- 1992 - 2000 GMC Yukon 1500 1/2 Ton
- 2000 - 2008 GMC Yukon XL 1500 1/2 Ton
- 2005 - 2008 Hummer H3
- 2003 - 2008 Isuzu Ascender
- 1970 - 1977 Oldsmobile Cutlass
- 1973 - 1979 Oldsmobile Omega
- 1978 - 1979) Plymouth Phoenix
- 1970 - 1986 Pontiac Bonneville
- 1970 - 1981 Pontiac Catalina
- 1970 - 1981 Pontiac Firebird
- 1971 - 1987 Pontiac Grand Prix
- 1970 - 1977 Pontiac GTO
- 1971 - 1983 Pontiac LeMans
- 1970 - 1981 Pontiac Trans Am
- 1976 - 1977 Pontiac Ventura
- 2005 - 2008 Saab 9-7x
*All Nitro Gear & Axle brand products are warrantied to be free of manufacturer defects for the specified period. Warranty requests must be made by the original purchaser and submitted by the dealer purchased from. Any parts sent for warranty consideration must be pre-approved and shipped prepaid freight to our facility with copy of RGA for our inspection & determination. We will not pay for labor, shipping cost, loss of revenue or perishable goods, commercial losses, costs of telephone calls, shipping or general inconvenience. This is our only warranty expressed or implied. Unauthorized warranty returns may be refused. Warranty generally covers MFG defects in material or workmanship. Abuse, overloading, improper lubrication, misuse, commercial or competition use voids warranty. Normal characteristics are not warrantable, such as Gear whine. Minor cosmetic flaws, dings, burrs from shipping or manufacturing, are not considered defect, it is installer responsibility to address these at time of install. Customer is responsible for shipping charges if warranty is granted. Warranty is for the original purchaser/user, is not transferable. Warranty covers one replacement or credit solely at our discretion. Warranty determinations are at our sole discretion.
In addition to the above conditions, see special notes for these products:
Ring & Pinion – Warrantied against manufacturing defects. 2 years from date of purchase. Must provide set-up specs.
Chromoly front Axles, Excalibur Joints, 30/30 Birfield kits - Warrantied against manufacturing defects for the life of the vehicle. These products are also covered for Breakage. The Shaft / joint must be BROKEN. Wear, twisting, bending are not warrantable. Damages caused by failure of other parts are not warrantable, for example broken U-joint (other than Nitro Excalibur) causing damage to Axle ears.
Rear Chromoly Axles - Warrantied against manufacturing defects for 5 years. These products are also covered for Breakage. The Shaft must be BROKEN. Worn, twisted, or bent axles are not warrantable.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features:
- Girdle covers increase the overall strength of your differential by reinforcing the main bearing caps with the incorporated load bolts.
- Made from 356 aircraft grade aluminum for durability and strength.
- Heat treated to T6 specifications and stress relieved.
- Machined using a 3 step CNC process ensuring accuracy and quality.
- Each cover is inspected, de-burred and assembled by hand before be packaged.
- All Girdles incorporate a Fill Port and a Drain Port for ease of servicing.
- Average increase fluid capacity by approximately 1/2 pint.
- Lowers the operating temperature of your differential by approximately 15 degrees.
- The average weight of a Nitro differential Girdle cover is about 7 pounds, larger covers will weigh more.
- Made in the USA.
|
|
|
|
|
|
|
|
|
