Chrysler 8.75" Nitro '489' Nodular Iron Drop-Out

Differential:	CHY 8.75" (489)
Gear Ratio:	All Ratios
Manufacturer:	Nitro Gear & Axle
Warranty:	1 Year

Until now if you wanted to build a nice Mopar 8.75" rear you had to use rusty dropout that's 50 years old! Well Nitro Gear & Axle has now manufactured a brand new 489 with all of the original casting stamps. It's made from nodular iron and features forged bearing caps with billet side adjusters. This unit will handle lots of power, slicks, trans brake or anything else you want to throw at it.

The Chrysler/Mopar 8.75" differential is a very popular and robust 3rd member type rear end used in a vast array of Chrysler, Dodge & Plymouth Muscle Cars form the 60???s & 70???s. The growing popularity of classic Mopar vehicles has created a shortage on used 3rd member cores. Nitro Gear is now offering brand new 8.75" 3rd member drop-out housings, utilizing the "489" casting design. The new Nitro housings are made of high strength Nodular Iron, with stronger bearing caps, and billet adjuster nuts for added strength .

WARNING:

This product can expose you to chemicals including toluene and benzene, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov

*All Nitro Gear & Axle brand products are warrantied to be free of manufacturer defects for the specified period. Warranty requests must be made by the original purchaser and submitted by the dealer purchased from. Any parts sent for warranty consideration must be pre-approved and shipped prepaid freight to our facility with copy of RGA for our inspection & determination. We will not pay for labor, shipping cost, loss of revenue or perishable goods, commercial losses, costs of telephone calls, shipping or general inconvenience. This is our only warranty expressed or implied. Unauthorized warranty returns may be refused. Warranty generally covers MFG defects in material or workmanship. Abuse, overloading, improper lubrication, misuse, commercial or competition use voids warranty. Normal characteristics are not warrantable, such as Gear whine. Minor cosmetic flaws, dings, burrs from shipping or manufacturing, are not considered defect, it is installer responsibility to address these at time of install. Customer is responsible for shipping charges if warranty is granted. Warranty is for the original purchaser/user, is not transferable. Warranty covers one replacement or credit solely at our discretion. Warranty determinations are at our sole discretion.

In addition to the above conditions, see special notes for these products:

Ring & Pinion – Warrantied against manufacturing defects. 2 years from date of purchase. Must provide set-up specs.

Chromoly front Axles, Excalibur Joints, 30/30 Birfield kits - Warrantied against manufacturing defects for the life of the vehicle. These products are also covered for Breakage. The Shaft / joint must be BROKEN. Wear, twisting, bending are not warrantable. Damages caused by failure of other parts are not warrantable, for example broken U-joint (other than Nitro Excalibur) causing damage to Axle ears.

Rear Chromoly Axles - Warrantied against manufacturing defects for 5 years. These products are also covered for Breakage. The Shaft must be BROKEN. Worn, twisted, or bent axles are not warrantable.