Toyota, Land Cruiser 80,100 & 105
3.12:1 HF2A
Nitro Low Range Transfer Case Gears
Fits:
1991-1997 Toyota Land Cruiser 80 Series FJ80 FZJ80 HZJ80 HDJ80 HDJ81
1998-2007 Toyota Land Cruiser 100 Series UZJ100 FZJ100 HDJ100
1998-2007 Toyota Land Cruiser 105 Series FZJ105 HZJ105
1991-2007 Toyota Venezuela 80 Series Land Cruiser Autana and Burbuja
1995-1997 Lexus LX450
1998-2007 Lexus LX470
Ratio:
|
3.12:1 HF2A
|
Manufacturer:
|
Nitro Gear & Axle
|
Tech Notes:
Includes a low speed gear, idler gear, and silicone.
Toyota Land Cruiser 80 series, 100 Series and 105 Series are among the most durable 4x4 vehicles on the planet. Outfitted with aftermarket accessories and over-sized tires, many have found the need for lower gearing in low range. While not a substitute for Ring & Pinion gearing, these low range gears improve the crawling performance significantly and steep Descent and Ascents become effortless. Easy to install, requires some clearance grinding. Bearing & Seal kit is not necessary, but available if you want to freshen up your high mileage T/Case. Includes Center Differential Low Speed Gear & Idler Low Speed Gear -3.12:1 ratio vs. 2.488:1 Stock ratio.

Nitro Gear & Axle strives to provide the highest quality differential components available. We take the steps necessary to ensure our parts are dependable. Our product range is continually growing to meet the needs of consumers for new ratios and Fits. At Nitro we know differentials, and know what it takes to provide you with high quality components.
WARNING:
|
This product can expose you to chemicals including toluene and benzene, which are known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to: www.P65Warnings.ca.gov
|
*All Nitro Gear & Axle brand products are warrantied to be free of manufacturer defects for the specified period. Warranty requests must be made by the original purchaser and submitted by the dealer purchased from. Any parts sent for warranty consideration must be pre-approved and shipped prepaid freight to our facility with copy of RGA for our inspection & determination. We will not pay for labor, shipping cost, loss of revenue or perishable goods, commercial losses, costs of telephone calls, shipping or general inconvenience. This is our only warranty expressed or implied. Unauthorized warranty returns may be refused. Warranty generally covers MFG defects in material or workmanship. Abuse, overloading, improper lubrication, misuse, commercial or competition use voids warranty. Normal characteristics are not warrantable, such as Gear whine. Minor cosmetic flaws, dings, burrs from shipping or manufacturing, are not considered defect, it is installer responsibility to address these at time of install. Customer is responsible for shipping charges if warranty is granted. Warranty is for the original purchaser/user, is not transferable. Warranty covers one replacement or credit solely at our discretion. Warranty determinations are at our sole discretion.
In addition to the above conditions, see special notes for these products:
Ring & Pinion – Warrantied against manufacturing defects. 2 years from date of purchase. Must provide set-up specs.
Chromoly front Axles, Excalibur Joints, 30/30 Birfield kits - Warrantied against manufacturing defects for the life of the vehicle. These products are also covered for Breakage. The Shaft / joint must be BROKEN. Wear, twisting, bending are not warrantable. Damages caused by failure of other parts are not warrantable, for example broken U-joint (other than Nitro Excalibur) causing damage to Axle ears.
Rear Chromoly Axles - Warrantied against manufacturing defects for 5 years. These products are also covered for Breakage. The Shaft must be BROKEN. Worn, twisted, or bent axles are not warrantable.