Ford 10.25" & 10.5"
Nitro Rear Differential Cover Gasket
Reuseable - Rubber

Differential:	Ford 10.25" & 10.5"
Cover Bolts:	12 (not included)
Manufacturer:	Nitro Gear & Axle

Nitro Gear & Axle strives to provide the highest quality differential components available. We take the steps necessary to ensure our parts are dependable. Our product range is continually growing to meet the needs of consumers for new ratios and Fits. At Nitro, we know differentials and know what it takes to provide you with high quality components.

USE IPK Dana 70-S-35 for Dana 70

8" & 9" 5-Tab Clutches (Early Equa Lock)

Fits:
1966-1986 Ford Bronco
1964-1977 Ford Comet
1967-1979 Mercury Cougar
1968-1983 Ford E100
1979-1988 Ford E150
1968-1974 Ford E200
1957-1983 Ford F100
1968-1987 Ford F150
1957-1971 Ford Fairlane
1960-1970 Ford Falcon
1959-1974 Ford Galaxie
1975-1979 Ford Granada
1975-1980 Mercury Grand Marquis
1965-1979 Ford LTD
1968-1974 Lincoln Mark III
1970-1978 Ford Maverick
1965-1973 Ford Mustang
1957-1979 Ford Ranchero
1955-1979 Ford Thunderbird
1968-1976 Ford Torino/Grand Torino

Nitro Gear & Axle strives to provide the highest quality differential & axle components available. We take the steps necessary to ensure our parts are dependable. Our product range is continually growing to meet the needs of consumers for new ratios and Fits. At Nitro we know differentials, and know what it takes to provide you with high quality components.

WOMEN'S SMALL, NITRO TANK TOP

WOMEN'S MEDIUM, NITRO GIRLY TEE SHIRT

WOMEN'S SMALL, NITRO GIRLY TEE SHIRT

YOUTH MEDIUM, NITRO TEE SHIRT

YOUTH SMALL, NITRO TEE SHIRT

Toyota, Land Cruiser 80,100 & 105
3.12:1 HF2A
Nitro Low Range Transfer Case Gears

Fits:
1991-1997 Toyota Land Cruiser 80 Series FJ80 FZJ80 HZJ80 HDJ80 HDJ81
1998-2007 Toyota Land Cruiser 100 Series UZJ100 FZJ100 HDJ100
1998-2007 Toyota Land Cruiser 105 Series FZJ105 HZJ105
1991-2007 Toyota Venezuela 80 Series Landcruiser Autana and Burbuja
Lexus LX450
Lexus LX470

Ratio:	3.12:1 HF2A
Manufacturer:	Nitro Gear & Axle

Tech Notes:
Includes a low speed gear, idler gear, and silicone.

Toyota Land Cruiser 80 series, 100 Series and 105 Series are among the most durable 4x4 vehicles on the planet. Outfitted with aftermarket accessories and over-sized tires, many have found the need for lower gearing in low range. While not a substitute for Ring & Pinion gearing, these low range gears improve the crawling performance significantly and steep Descent and Ascents become effortless. Easy to install, requires some clearance grinding. Bearing & Seal kit is not necessary, but available if you want to freshen up your high mileage T/Case. Includes Center Differential Low Speed Gear & Idler Low Speed Gear -3.12:1 ratio vs. 2.488:1 Stock ratio.

WARNING:

This product can expose you to chemicals including toluene and benzene, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov

Product price is not filled in. This product cannot be purchased.

Nitro Power Lock Limited Slip for Dana 60

Differential:	Dana 60
Gear Ratios:	4.56 & Up
Axle Splines:	30
Manufacturer:	Nitro Gear & Axle
Warranty:	1 Year*

Nitro Gear & Axle strives to provide the highest quality differential & axle components available. We take the steps necessary to ensure our parts are dependable. Our product range is continually growing to meet the needs of consumers for new ratios and Fits. At Nitro we know differentials, and know what it takes to provide you with high quality components.

Nitro Power Lock Limited Slip for Dana 60

Differential:	Dana 60
Gear Ratios:	4.56 & Up
Axle Splines:	35
Manufacturer:	Nitro Gear & Axle
Warranty:	1 Year*

Tech Notes:
This positraction is not for use in any of the semi float C-Clip type Dana 60 rear axles.
Nitro Gear & Axle strives to provide the highest quality differential & axle components available. We take the steps necessary to ensure our parts are dependable. Our product range is continually growing to meet the needs of consumers for new ratios and Fits. At Nitro we know differentials, and know what it takes to provide you with high quality components.

AMC Model 20
3.08 Nitro Ring & Pinion

Fits:
1976-1986 Jeep CJ7
1976-1983 Jeep CJ5
1982-1986 Jeep Scrambler CJ8
1979-1986 Jeep Wagoneer & Grand Wagoneer FSJ
1967-1974 AMC Ambassador
1968-1970 AMC AMX
1972-1976 AMC Gremlin 304 V8
1970-1977 AMC Hornet with V8
1968-1974 AMC Javelin with V8
1971-1978 AMC Matador
1978-1978 AMC Pacer with 304 V8
1979 AMC Spirit

Differential:	Model 20
Gear Ratio:	3.08
Tooth Count:	43/14
Pinion Splines:	28
Ring Gear Bolts:	8 (not included)
Manufacturer:	Nitro Gear & Axle
Warranty:	2 Years

Nitro gears are manufactured from 8620 steel gear forgings in the same manufacturing facilities as GM, Dodge, Ford & Toyota. They are precision machined using computer controlled processes, heat treated, CNC triple-lapped and Rockwell tested for hardness. These extra steps ensure excellent fitment, ideal contact pattern and smooth, quiet operation.

Toyota FJ40 & FJ60 Landcruiser Right Hand Inner Axle Shaft (30 Spl) 17.3"

Nitro Gear & Axle strives to provide the highest quality differential components available. We take the steps necessary to ensure our parts are dependable. Our product range is continually growing to meet the needs of consumers for new ratios and Fits. At Nitro, we know differentials and know what it takes to provide you with high-quality components.

Toyota 4340 Front Inner Axle, 30/30 Spline 27.75-31.5" Long, CTL

Nitro Gear & Axle strives to provide the highest quality differential components available. We take the steps necessary to ensure our parts are dependable. Our product range is continually growing to meet the needs of consumers for new ratios and Fits. At Nitro, we know differentials and know what it takes to provide you with high-quality components.

Toyota 4340 Front Inner Axle, 30/30 Spline 14.5"-17.3" Short, CTL

Nitro Gear & Axle strives to provide the highest quality differential components available. We take the steps necessary to ensure our parts are dependable. Our product range is continually growing to meet the needs of consumers for new ratios and Fits. At Nitro, we know differentials and know what it takes to provide you with high-quality components.

AAM 11.5" GM & Dodge

Nitro Standard Open Carrier Case (Empty)

Differential:	AAM 11.5
Gear Ratio:	All Ratios
Axle Splines:	(Empty)
Ring Gear Bolts:	12 (not included)
Manufacturer:	Nitro Gear & Axle

Note:

Nitro Gear & Axle strives to provide the highest quality differential components available. We take the steps necessary to ensure our parts are dependable. Our product range is continually growing to meet the needs of consumers for new ratios and Fits. At Nitro we know differentials, and know what it takes to provide you with high quality components.

Nitro FlexFit Hat

Choose from black or light grey and small/medium or large/extra large.

This hat displays a stylized Nitro logo on the left side as well as a small Nitro logo on the back. Get yours today!

Nitro FlexFit Hat

Choose from black or light grey and small/medium or large/extra large.

This hat displays a stylized Nitro logo on the left side as well as a small Nitro logo on the back. Get yours today!

Nitro FlexFit Hat

Choose from black or light grey and small/medium or large/extra large.

This hat displays a stylized Nitro logo on the left side as well as a small Nitro logo on the back. Get yours today!

Nitro FlexFit Hat

Choose from black or light grey and small/medium or large/extra large.

This hat displays a stylized Nitro logo on the left side as well as a small Nitro logo on the back. Get yours today!

Nitro FlexFit Hat

Choose from black or light grey and small/medium or large/extra large.

This hat displays a stylized Nitro logo on the left side as well as a small Nitro logo on the back. Get yours today!

Ford 7.5"
2.73 Nitro Ring & Pinion

Fits:
1979-2009 Mustang (not V8)
1979-1983 Ford Fairmont
1979-1983 Ford Granada
1979-1983 Ford Pinto
1980-1997 Ford Thunderbird
1984-1990 Ford Bronco II
1984-2009 Ford Ranger (Not 4.0 V6)
1983-2002 Ford Aerostar Van
1994-2009 Mazda B2300 B2500 B3000 Pickups

Differential:	Ford 7.5", 10-bolt
Gear Ratio:	2.73
Tooth Count:	30/11
Pinion Splines:	28
Ring Gear Bolts:	10 (not included)
Manufacturer:	Nitro Gear & Axle
Warranty:	2 Years

Nitro gears are manufactured from 8620 steel gear forgings in the same manufacturing facilities as GM, Dodge, Ford & Toyota. They are precision machined using computer controlled processes, heat treated, CNC triple-lapped and Rockwell tested for hardness. These extra steps ensure excellent fitment, ideal contact pattern and smooth, quiet operation.

B1189

39" Blank 1350 U-Joint, Front Inner Axle (Not Splined) for Dana 44

Fits:
2007-2016 Jeep Wrangler JK

Nitro 1541H steel and 4340 alloy & chromium and molybdenum alloy axles commonly known as "chromoly":
Our OE replacement axles are made of 1541H steel for a 25-35% increase in strength over their stock counterparts. Nitro 4340 chromoly axles are also heat treated but are designed with extra material for strength where it's needed. All of our axles are precision machined to OE specifications for excellent fitment.

1541H steel is a heat treated, carbon steel with .41% or less of other impurities. The heat treatments make the metal harder, with out making it brittle with a tensile strength of 181,000 psi. Up to 35% stronger than OE axles.

4340 cromoly steel, is a lower carbon steel with a minimum of 10% chromium by weight. Known as a high strength, low carbon steel with a tensile strength of 228,000 psi opposed to OE standard 1040 steel with a tensile strength of 110,000 to 130,000 psi.

That means they take more punishment, to get you further down the trail or off the trail entirely. That's Nitro Tough.

Nitro also offers extra long-splined shafts which can be cut to length and blank shafts for custom spline machining. Each new product is subjected to multi-point inspections and then actually installed and set up by Nitro's own in-house differential professionals to ensure excellent fitment and easy setup. At Nitro we strive to meet demands for new ratios and Fits and we are continually developing new products to stay ahead of the competition.

• CNC precision machining & heat treating processes ensure excellent fitment and overall strength.
• Our heat treatment is applied after the splines are cut which allows for deeper penetration where strength is needed.
• We have a rapid and ever growing range of products to meet new demands and Fits.

Please contact us with your specific questions and inquiries.


Nitro Gear & Axle strives to provide the highest quality differential & axle components available. We take the steps necessary to ensure our parts are dependable. Our product range is continually growing to meet the needs of consumers for new ratios and Fits. At Nitro, we know differentials and know what it takes to provide you with high quality components.

22" Blank 1350 U-Joint, Front Inner Axle (Not Splined) for Dana 44

Fits:
2007-2017 Jeep JK

Nitro 1541H steel and 4340 alloy & chromium and molybdenum alloy axles commonly known as "chromoly":
Our OE replacement axles are made of 1541H steel for a 25-35% increase in strength over their stock counterparts. Nitro 4340 chromoly axles are also heat treated but are designed with extra material for strength where it's needed. All of our axles are precision machined to OE specifications for excellent fitment.

1541H steel is a heat treated, carbon steel with .41% or less of other impurities. The heat treatments make the metal harder, with out making it brittle with a tensile strength of 181,000 psi. Up to 35% stronger than OE axles.

4340 cromoly steel, is a lower carbon steel with a minimum of 10% chromium by weight. Known as a high strength, low carbon steel with a tensile strength of 228,000 psi opposed to OE standard 1040 steel with a tensile strength of 110,000 to 130,000 psi.

That means they take more punishment, to get you further down the trail or off the trail entirely. That's Nitro Tough.

Nitro also offers extra long-splined shafts which can be cut to length and blank shafts for custom spline machining. Each new product is subjected to multi-point inspections and then actually installed and set up by Nitro's own in-house differential professionals to ensure excellent fitment and easy setup. At Nitro we strive to meet demands for new ratios and Fits and we are continually developing new products to stay ahead of the competition.

• CNC precision machining & heat treating processes ensure excellent fitment and overall strength.
• Our heat treatment is applied after the splines are cut which allows for deeper penetration where strength is needed.
• We have a rapid and ever growing range of products to meet new demands and Fits.

Please contact us with your specific questions and inquiries.

Nitro Gear & Axle strives to provide the highest quality differential & axle components available. We take the steps necessary to ensure our parts are dependable. Our product range is continually growing to meet the needs of consumers for new ratios and Fits. At Nitro, we know differentials and know what it takes to provide you with high quality components.

8.75" Chrysler 4-Pinion (42) Bearing Kit (25590/20)

GM 8.875" 12 Bolt - Car
5.86 Nitro Ring & Pinion

Differential:	GM 8-7/8" 12 Bolt - Car
Gear Ratio:	5.86
Pinion Splines:	30
Gear bolts:	12 (not included)
Manufacturer:	Nitro Gear & Axle
Warranty:	2 Years

Nitro gears are manufactured from 8620 steel gear forgings in the same manufacturing facilities as GM, Dodge, Ford & Toyota. They are precision machined using computer controlled processes, heat treated, CNC triple-lapped and Rockwell tested for hardness. These extra steps ensure excellent fitment, ideal contact pattern and smooth, quiet operation.

GM 250mm, IRS
3.23 OEM Ring & Pinion

Fits:
2013+ Camaro ZL1

Differential:	GM 250mm IRS
Gear Ratio:	3.23
Tooth Count:	42/13
Manufacturer:	GM
Warranty:	1 Year

GM 250mm, IRS
3.73 OEM Ring & Pinion

Fits:
2013+ Camaro ZL1

Differential:	GM 250mm IRS
Gear Ratio:	3.73
Tooth Count:	41/11
Manufacturer:	GM
Warranty:	1 Year

1998-2007 Toyota Land Cruiser 100 Series
without OEM E-Locker
Nitro Front & Rear Gear Package Kit, Select Ratio

Fits:
1998-2007 Toyota Landcruiser 100 Series without OEM E-Locker
Lexus LX470

Front Differential:	Toyota 8" Rev. IFS
Rear Differential:	Toyota 9.5"
Gear Ratio:	4.30 or 4.88
Manufacturer:	Nitro Gear & Axle
Warranty:	2 Years

Recommended:
6 quarts of Nitro Synthe
tic Plus Gear Lube

Tech Note:
4.30 ratio: 1998-2002 100 series require front and rear yokes:YOKT35100-MULTI x2.
4.88 ratio: 1998-2002 100 series require front yoke only: YOKT35100-MULTI x1

Gear Package Kit Includes:
Nitro front ring & pinion
Nitro front Master Install Kit
Nitro rear ring & pinion
Nitro rear Master Install Kit
front pinion pre-load spacer
rear pinion pre-load spacer

Suffering from poor performance and reduced fuel economy resulting from oversized tires?

A Nitro gear change will help get that performance and economy back!

If you've fitted larger tires to your vehicle then you are likely experiencing a loss in performance, fuel economy, and more constant transmission gear “hunting" - This is because the larger tires reduce your engine's RPMs below the optimal power band. Re-gearing the differentials in your vehicle is the only way to get your vehicle back into its optimal operating RPM range, thus improving performance and reducing strain on your vehicle's drivetrain. This is especially important for today's vehicles as they feature tall factory gearing and overdrive transmissions which are less tolerant to increase in tire size or the weight of added accessories.

It's a common misconception that gear changes are reserved only to hardcore off-roaders or trucks with huge tires. However, re-gearing is one of the single most beneficial modifications you can make to keep the performance, economy, and durability of your daily-driven 4x4. This is a mod for anyone with larger tires, increased weight, or for increased performance on stock vehicles for towing or increased acceleration.

We at Nitro Gear & Axle realize the difficulty for the average consumer or install shop to compile the list of parts and prices required when doing a gear change. To make it easier for everyone the experts at Nitro are introducing an industry first- “Gear Packages" for many popular 4x4 Fits. One part number. One price. One click away. U-tube:


"Nitro Gear Install"

1998-2007 Toyota Land Cruiser 100 Series
without OEM E-Locker
Nitro Front & Rear Gear Package Kit, Select Ratio

Fits:
1998-2007 Toyota Landcruiser 100 Series without OEM E-Locker
Lexus LX470

Front Differential:	Toyota 8" Rev. IFS
Rear Differential:	Toyota 9.5"
Gear Ratio:	4.30 or 4.88
Manufacturer:	Nitro Gear & Axle
Warranty:	2 Years

Recommended:
6 quarts of Nitro Synthe
tic Plus Gear Lube

Tech Note:
4.30 ratio: 1998-2002 100 series require front and rear yokes:YOKT35100-MULTI x2.
4.88 ratio: 1998-2002 100 series require front yoke only: YOKT35100-MULTI x1

Gear Package Kit Includes:
Nitro front ring & pinion
Nitro front Master Install Kit
Nitro rear ring & pinion
Nitro rear Master Install Kit
front pinion pre-load spacer
rear pinion pre-load spacer

Suffering from poor performance and reduced fuel economy resulting from oversized tires?

A Nitro gear change will help get that performance and economy back!

If you've fitted larger tires to your vehicle then you are likely experiencing a loss in performance, fuel economy, and more constant transmission gear “hunting" - This is because the larger tires reduce your engine's RPMs below the optimal power band. Re-gearing the differentials in your vehicle is the only way to get your vehicle back into its optimal operating RPM range, thus improving performance and reducing strain on your vehicle's drivetrain. This is especially important for today's vehicles as they feature tall factory gearing and overdrive transmissions which are less tolerant to increase in tire size or the weight of added accessories.

It's a common misconception that gear changes are reserved only to hardcore off-roaders or trucks with huge tires. However, re-gearing is one of the single most beneficial modifications you can make to keep the performance, economy, and durability of your daily-driven 4x4. This is a mod for anyone with larger tires, increased weight, or for increased performance on stock vehicles for towing or increased acceleration.

We at Nitro Gear & Axle realize the difficulty for the average consumer or install shop to compile the list of parts and prices required when doing a gear change. To make it easier for everyone the experts at Nitro are introducing an industry first- “Gear Packages" for many popular 4x4 Fits. One part number. One price. One click away. U-tube:


"Nitro Gear Install"