 |
 |
 |
|
Toyota 8" IFS Nitro Master Install Kit
Fits:
2012- 2016 Scion FR-S
2012 & Newer Subaru BRZ
2012 & Newer Toyota 86
1998-2005 Lexus IS300
1998-2007 Toyota Land Cruiser UZJ100 FZJ100 HDJ100
|
Differential:
|
T8 IFS
|
|
Ring Gear Bolts:
|
10 (not included)
|
|
Manufacturer:
|
Nitro Gear & Axle
|
Recommended:
3 quarts of
Nitro Synthetic Plus Gear Lube
Kit Contents:
Pinion Bearing & Race x2
Carrier Bearing & Race x2
Pinion Nut x1
Pinion Seal x1
Pinion Depth Shims
Crush Sleeve x1
Stub Axle Side Seal x2
Silicone x1
Marking Compound x1
Brush x1
Loctite x1
The kits assembled by Nitro Gear & Axle only use the highest quality bearings available from Timken & Koyo. Nitro Gear & Axle does not use any cheap Chinese bearings. By using only Timken & Koyo bearings just like all of the OEM vehicle manufacturers you can be assured that your differential will be reliable, durable, & quiet for years to come.
Nitro Gear & Axle strives to provide the highest quality differential components available. We take the steps necessary to ensure our parts are dependable. Our product range is continually growing to meet the needs of consumers for new ratios and Fits. At Nitro we know differentials, and know what it takes to provide you with high quality components.
|
 WARNING:
|
This product can expose you to chemicals including toluene and benzene, which are known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to: www.P65Warnings.ca.gov
|
- 2012-2016 Scion FR-S
- 2012 & Newer Subaru BRZ
- 2012 & Newer Toyota 86
- 1998-2007 Toyota Landcruiser UZJ100 FZJ100 HDJ100
- 1999-2007 Lexus LX470 Front
- 2001-2005 Lexus IS300
- 2005-2014 Lexus GS300, GS350, GS400, GS420 & GS460
- 1986-1993 Toyota Supra
- 1989-1992 Toyota Cressida
- 1987-2009 Toyota Crown (Non US model)
- 1999-2005 Lexus IS200 (non US model)
*All Nitro Gear & Axle brand products are warrantied to be free of manufacturer defects for the specified period. Warranty requests must be made by the original purchaser and submitted by the dealer purchased from. Any parts sent for warranty consideration must be pre-approved and shipped prepaid freight to our facility with copy of RGA for our inspection & determination. We will not pay for labor, shipping cost, loss of revenue or perishable goods, commercial losses, costs of telephone calls, shipping or general inconvenience. This is our only warranty expressed or implied. Unauthorized warranty returns may be refused. Warranty generally covers MFG defects in material or workmanship. Abuse, overloading, improper lubrication, misuse, commercial or competition use voids warranty. Normal characteristics are not warrantable, such as Gear whine. Minor cosmetic flaws, dings, burrs from shipping or manufacturing, are not considered defect, it is installer responsibility to address these at time of install. Customer is responsible for shipping charges if warranty is granted. Warranty is for the original purchaser/user, is not transferable. Warranty covers one replacement or credit solely at our discretion. Warranty determinations are at our sole discretion.
In addition to the above conditions, see special notes for these products:
Ring & Pinion – Warrantied against manufacturing defects. 2 years from date of purchase. Must provide set-up specs.
Chromoly front Axles, Excalibur Joints, 30/30 Birfield kits - Warrantied against manufacturing defects for the life of the vehicle. These products are also covered for Breakage. The Shaft / joint must be BROKEN. Wear, twisting, bending are not warrantable. Damages caused by failure of other parts are not warrantable, for example broken U-joint (other than Nitro Excalibur) causing damage to Axle ears.
Rear Chromoly Axles - Warrantied against manufacturing defects for 5 years. These products are also covered for Breakage. The Shaft must be BROKEN. Worn, twisted, or bent axles are not warrantable.
|
|
|
 |
|
 |
|
|
|
Install Kit (Incl Side Seals) 
