| AXC8.75-STUD |
|
|
| AXCVIFS-WK |
|
|
| AXCVIFS-WK-LSD |
|
|
| AXD30JK-BIRF |
|
|
| AXD30JK-BIRF-30 |
|
|
| AXD44JK-32-RCV |
|
|
| AXD60-CVJ |
|
|
| AXD708064 |
|
|
| TLF8.8-31 |
|
|
| NS8873 |
|
LATE MODEL PINION SEAL (SOME 2000 & UP) & D30 WJ 01+, RUBICON Dana 44 & Dana 50 |
| YOKD44HD-SNAP |
|
0.090", Nitro Corvette Axle Yoke Snap Ring for Dana 44HD |
| D60SR-410R-NG |
|
for Dana Super 60, D60SR-410R-NG"> 10" Shot Peened Gears, 4.10 Reverse High PInion, Nitro Ring & Pinion
for Dana Super 60 |
| YOKD60-1310-29U |
|
1310, Nitro U-bolt Yoke for Dana 44HD,60,70 |
| MKD300 |
|
1980-1986 Jeep, Transfer Case, Nitro Master Install Kit for Dana 30 |
| MKD36 |
|
1984-1996 Corvette, ICA, Nitro Master Install Kit for Dana 36 |
| MKD30-CS |
|
1992-1996.5 Jeep Grand Cherokee, Crush-Sleeve, Front, Nitro Master Install Kit for Dana 30 |
| MKD30-KJ |
|
2002-2007 Jeep Liberty KJ, Front, Nitro Master Install Kit for Dana 30 |
| MKD44TJ-RUB-R |
|
2003-2006 Jeep TJ & LJ Rubicon Nitro Master Install Kit for Dana 44, Rear |
| MKD30-JK |
|
2007 & NewerJeep Wrangler JK, Non Rubicon, Front, Nitro Master Install Kit for Dana 30 |
| AXN24106 |
|
27 Spline, 5-760X, Nitro 4340 Front Axle Kit for Dana 30 |
| AXN24112 |
|
27 Spline, Excalibur 5-760X, Nitro 4340 Front Axle Kit for Dana 30 |
| AXN24126 |
|
27/30 Spline, 5-760X Nitro 4340 Front Axle Kit for Dana 44 |
| AXN24109 |
|
27/30 Spline, Excalibur 5-760X, Nitro 4340 Front Axle Kit (OEM locker) for Dana 44 |
| D30CS-373-NG |
|
3.73 Ratio, Nitro Ring & Pinion with crush sleeve
(Long Pinion, Jeep Grand Cherokee Front)
for Dana 30 |
| AXN24106-30 |
|
30 Spline 4340 Front Axle Kit, w/ 760X 72-81 Jeep CJ5 for Dana 30 |
| AXD85155-4 |
|
35 Spline, Left Hand Nitro Front Axle Assembly for Dana Super 60 |
| D60-488-NG |
|
4.88, Nitro Ring & Pinion
for Dana 60 |
| D44R-488R-NG |
|
4.88, Reverse High Pinion, Nitro Ring & Pinion
for Dana 44 |
| AXN24117 |
|
66-71 Ford Bronco, 27 Spline 5-760X, Nitro 4340 Front Axle Kit for Dana 30 |
| AXN38103 |
|
77-86 Jeep CJ5, CJ7, & CJ8 Scrambler, Disc Brake, Front Spindle for Dana 30 |
| AXD76467-3X |
|
99-04 Jeep Grand Cherokee WJ, Bolt In, 27 Spline 30.25", Right Hand Rear Axle Shaft for Dana 35 |
| AXM35B-27-R-HD |
|
Bolt-In, 27 Spline 29", 5 Lug, Right Hand Nitro HD Rear Axle Shaft for Dana 35 |
| AXM35B-30-R |
|
Bolt-In, 30 Spline 29", 5 Lug, Right Hand Nitro Rear Axle Shaft for Dana 35 |
| AXM35C-30-R |
|
C-Clip, 90+ XJ, YJ, TJ & ZJ, 30 Spline 29-1/4", Dual Drilled, 5 Lug, Right Hand Nitro Rear Axle Shaft (1/2" threaded studs, Requires use of old ABS ring) for Dana 35 |
| AXD44JK-35RD147 |
|
Chromoly Rear Axle Shaft Bundle with ARB RD147, 35 Spline for Dana 44 |
| AXD44JK-35RD157 |
|
Chromoly Rear Axle Shaft Bundle with ARB RD157, 35 Spline for Dana 44 |
| AXD44JK-35AG |
|
Chromoly Rear Axle Shaft Bundle with Auburn Ected, 35 Spline for Dana 44 |
| MKD60-F |
|
Common Inner Axle Seals, Nitro Master Install Kit for Dana 60 Dana 61, Front |
| MKD44-DIS |
|
Dodge Front, Isuzu Rodeo Rear, Nitro Master Install Kit for Dana 44, w/Disconnect |
| AXD36113-1 |
|
Ford F-350 Chassis, Nitro Rear Axle Shaft for Dana 60, Dana 70 & Dana 80 |
| MKD80-B |
|
Ford Nitro Master Install Kit, Rear, 4.375" OD, for Dana 80 |
| DAN37299 |
|
Heavy Duty, Nitro Forged King-Pin Lower Bearing Cap Upgrade for Dana 60 |
| PKD50 |
|
IFS & Solid, Nitro Front Pinion Setup Kit for Dana 50 |
| AXD47067 |
|
IFS 5-7/8" 27 Spline, 760X, Left Hand Nitro Front Outer Stub Axle for Dana 35 |
| AXD46242 |
|
IFS 7.94" 27 Spline TTB 760X, Nitro Front Outer Stub Axle for Dana 35 |
| AXD2-3-8741X |
|
IFS TTB Slip Yoke, 1984-1996 F150, F250, Bronco, 5.06" for Dana 44 |
| MKD44-IFS-E |
|
IFS, 1980-1992 Ford Twin Traction Beam, Nitro Master Install Kit for Dana 44, Front |
| MKD44-IFS-L |
|
IFS, 1993-1996 Ford Twin Traction Beam, Nitro Master Install Kit for Dana 44, Front |
| MKD30-IFS |
|
IFS, 2001 & Newer Ford Explorer, Front, Nitro Master Install Kit for Dana 30 |
| MKD44JAG-A |
|
Jaguar Nitro Master Install Kit for Dana 44, LM25577 |
| MKD44JAG-B |
|
Jaguar Nitro Master Install Kit for Dana 44, LM25590 |
| MKD30-F |
|
Jeep CJ, XJ, YJ, W/O Crush Sleeve, Front, Nitro Master Install Kit for Dana 30 |
| YOKD44JK-1310-24R |
|
Jeep JK Rear, 1310 Series Forged Pinion Yoke, 24 Spline (U-Bolt) for Dana 30 & 44 |
| MKD44JK-RUB-R |
|
Jeep JK Rubicon Nitro Master Install Kit for Dana 44, 32 Spline, Rear |
| MKD44JK-RUB-F |
|
Jeep JK Rubicon Nitro Master Install Kit for Dana 44, Front |
| MKD44JK-TF |
|
Jeep JK Rubicon, Teraflex Upgrade, Nitro Master Install Kit for Dana 44, Front |
| PKD44JK-REV |
|
Jeep JK, Nitro Front Pinion Setup Kit for Dana 30JK & 44RS |
| MKD44TJ-RUB-F |
|
Jeep TJ Rubicon Nitro Master Install Kit for Dana 44, Front |
| MKD30-TJ |
|
Jeep TJ, WJ, ZJ, XJ, Short Pinion, Front, Nitro Master Install Kit for Dana 30 |
| AXN39147-KIT |
|
Jeep XJ & YJ, Nitro Disconnect Axle Block Off Kit for Dana 30 |
| AXN24110 |
|
Jeep XJ, YJ, TJ, ZJ & MJ, 27 Spline 5-760X, Nitro 4340 Front Axle Kit for Dana 30 |
| YOKD44JK-1350-24R |
|
JK Rear, 1350 Series Forged Pinion Yoke, 24 Spl (U-Bolt) 1.875' Seal Surface for Dana 30 & 44 |
| MKD44-19 |
|
Nitro Master Install Kit for Dana 44, 19 Spline, Rear |
| MKD44-REAR |
|
Nitro Master Install Kit for Dana 44, 30 Spline, Rear |
| MKD44JK-REAR |
|
Nitro Master Install Kit for Dana 44, 30 Spline, Rear |
| MKD44 |
|
Nitro Master Install Kit for Dana 44, Front |
| MKD44-VET |
|
Nitro Master Install Kit for Dana 44, Rear |
| MKD30-R |
|
Rear, Nitro Master Install Kit for Dana 30 |
| BRGNP673386 |
|
Reverse Pinion Bearing Race (1.190" Th, 4.375" O.D.) for Dana 80 |
| AXD84378-1 |
|
Right Hand Axle Assembly, 37.96" OA 31.85" Inner, Jeep TJ, LJ Rubicon (ABS Ring Incl) for Dana 44 |
| MKD44-REV |
|
Straight Axle, Nitro Master Install Kit for Dana 44, Front |
| D60SNAPRING-KIT |
|
(8) Full Circle Snap Rings,
for Dana 60 806x U/JOINT with Aftermarket Axle |
| D44SNAPRING-KIT |
|
(8) FULL CIRCLE SNAP RINGS, FITS D44 297X U/JOINT W/AFTMKT AXLE |
| TOYSPACER |
|
.125" SPACER TO USE 4 CYL GEAR IN V6 3RD |
| AXD80179-1 |
|
00-01.5 Dodge 2500/3500, 18 Spline 18.79", Right Hand Nitro Front Intermediate Inner Axle for Dana 60 |
| AXD49490 |
|
00-01.5 Dodge, 32/18 Spline 19.77", Nitro Extreme Front Inner Disconnect Axle for Dana 80 |
| DAN49489 |
|
00-02 Dodge D60 Front Inner Axle Seal LH (32 Spline) 5015201AA (Also RH On '02) |
| DAN49485 |
|
00-02 Dodge D60 Front Inner Axle Seal RH (32 Spline) 5015198AA |
| NS710468 |
|
01-06 MB/Dodge/Freightliner Sprinter Van SRW Rear Wheel Seal |
| AXAAM11.5D-DRW |
|
03+ Ram 3500 11.5 DRW Rear Axle Shaft, 40.1" |
| AXD85155-3 |
|
05-06 Ford F-450/550, 35 Spline 49" Overall, 41-3/8" Inner, 1550, Right Hand Nitro Front Axle Assembly for Dana Super 60 |
| DED60002FL |
|
05-12 Ford Superduty Dana 60 Balljoint LH High Steer Knuckle |
| SKCSD44RS |
|
07+ Jeep JK, Nitro Front Solid Pinion Preload Spacer for Dana 30JK & 44RS |
| TOY90366-A0014 |
|
08+ Toyota 9.5" Land Cruiser / Tundra Outer Pinion Bearing/Race, For Use W/ OEM 32 Spline Pinion |
| DAN30636 |
|
1.750" ID Spindle Nut, D60, 6 Sides |
| DAN30637 |
|
1.830" ID Flat Retainer, D60&D70, 10 Outer Tabs, Spindle |
| DAN39695 |
|
1.940" ID Spindle Nut, W/ Plastic Ring |
| NPSP-D70SPL |
|
1/2" - 9/16" Ring Gear Bolt Spacers |
| NWS.500-20-SPLINE |
|
1/2"-20 Black Spline Drive Lug Nut |
| AXSTUD-JK |
|
1/2"-20 Jeep Wrangler JK Rear Press-In Axle Stud, For use with OEM axles |
| DAN30137 |
|
1/2"-20 Unitorque Lock Nut |
| DAN45712-1 |
|
1/2"-20 Wheel Stud, .605" Knurl, 84 & Up Jeep Rear M35, D44 |
| D60SR-430RT-NG |
|
for Dana Super 60, D60SR-430RT-NG">10" Shot Peened Gears, 4.30 Reverse High Pinion, Nitro Ring & Pinion
for Dana Super 60 |
| D60SR-456RT-NG |
|
for Dana Super 60, D60SR-456RT-NG">10" Shot Peened Gears, 4.56 Reverse High Pinion, Nitro Ring & Pinion
for Dana Super 60 |
| D60SR-488RT-NG |
|
for Dana Super 60, D60SR-488RT-NG">10" Shot Peened Gears, 4.88 Reverse High Pinion, Nitro Ring & Pinion
for Dana Super 60 |
| D60SR-513RT-NG |
|
for Dana Super 60, D60SR-513RT-NG">10" Shot Peened Gears, 5.13 Reverse High Pinion, Nitro Ring & Pinion
for Dana Super 60 |
| D60SR-538RT-NG |
|
for Dana Super 60, D60SR-538RT-NG">10" Shot Peened Gears, 5.38 Reverse High Pinion, Nitro Ring & Pinion
for Dana Super 60 |
| FORF100402 |
|
10.25 & 9.75 Ford X/P Bolt Standard Or T/L |
| FORF100110 |
|
10.25" & 10.5" COVER GASKET |
| FORF100111 |
|
10.25" Ford ABS Exciter Tone Ring |
| NS4278 |
|
10.25" Ford Pinion Seal (00-13 9.75") |
| FORF100304 |
|
10.25" P/G T/W, Standard & T/L |
| NS370047A |
|
10.25" Rear Wheel Bearing Seal |
| FORF100105 |
|
10.25", M20, M35 Pinion Nut (97-99 9.75" Ford) 7/8"-20TPI |
| AXAAM11.5D-SRW |
|
10.5 & 11.5 Single Rear Wheel Axle Shaft, 36.8" |
| CHY40010207 |
|
10.5" AAM Crush Sleeve, 03+ Dodge Ram, C/S |
| AXF100007 |
|
10.5" Ford 35 Spline, Full Float Left Hand Axle Shaft 37-5/8" |
| F10.5-456-NG |
|
10.5" Ford 4.56 R&P, 99-10 F250/F350 Superduty & Excursion |
| BRGNP114036 |
|
10.5" Ford Rear Inner Wheel Bearing |
| BRGNP064306 |
|
10.5" Ford Rear Inner Wheel Bearing Race |
| BRGNP761271 |
|
10.5" Ford Rear Pinion Bearing (08-10) |
| BRGNP504493 |
|
10.5" Ford Rear Pinion Bearing (99-10) |
| BRGNP998236 |
|
10.5" Ford Rear Pinion Bearing Race |
| BRGNP949481 |
|
10.5" Ford Rear Pinion Bearing Race (99-10) |
| NS350047A |
|
10.5" Ford Superduty Rear Wheel Brg Seal |
| AXN46104 |
|
11.4" 30 Spline 5-806X, Nitro 4340 Front Outer Stub Axle for Dana 60 |
| AXD620085 |
|
11.4" 30 Spline 5-806X, Nitro Front Outer Stub Axle for Dana 60 |
| AXD48903 |
|
11.4" 30 Spline 733X, Nitro Front Outer Stub Axle for Dana 80 |
| YOKAAM11.8-FLANGE |
|
11.5" & 11.8" AAM Pinion Yoke, Scalloped |
| AXG15898642 |
|
11.5" AAM 2003-2013 Chevy/GMC 3500HD DRW, Nitro Rear Axle Shaft, 39.88" |
| AAM11.5COVER-A |
|
Finned Aluminum Diff Cover Kit
Includes gasket, bolts, & magnetic fill plug, AAM11.5COVER-A">11.5" AAM Dodge & GM 14 Bolt
Finned Aluminum Diff Cover Kit
Includes gasket, bolts, & magnetic fill plug |
| AAM11.5BP-342-OE |
|
Incl Pinion nut, Crush Sleeve, & Pinion Seal, AAM11.5BP-342-OE">11.5" AAM Large Diameter Pinion Ring & Pinion 3.42 Ratio,
Incl Pinion nut, Crush Sleeve, & Pinion Seal |
| AAM11.5BP-373-OE |
|
Incl Pinion nut, Crush Sleeve, & Pinion Seal, AAM11.5BP-373-OE">11.5" AAM Large Diameter Pinion Ring & Pinion 3.73 Ratio,
Incl Pinion nut, Crush Sleeve, & Pinion Seal |
| AAM11.5BP-410-OE |
|
Incl Pinion nut, Crush Sleeve, & Pinion Seal, AAM11.5BP-410-OE">11.5" AAM Large Diameter Pinion Ring & Pinion 4.10 Ratio,
Incl Pinion nut, Crush Sleeve, & Pinion Seal |
| IPKGM11.5-S-30 |
|
11.5" AAM Spider Gear Kit 01-06 Chevy & GMC, (Discontinued) Use NC-AAM11.5 |
| AXD40955 |
|
12" 30 Spline 5-806X, Nitro Front Outer Stub Axle for Dana 60 |
| AXN46105 |
|
12" 30 Spline GM 5-806X, Nitro 4340 Front Outer Stub Axle for Dana 60 |
| AXN46100 |
|
12" 35 Spline 5-806X, Nitro 4340 Front Outer Stub Axle for Dana 60 & Dana 70 |
| AXD3-82-871 |
|
12" 35 Spline 5-806X, Nitro Rear Outer Stub Axle for Dana 60 & 70 |
| NWS12X1.5-LUG |
|
12MM X 1.5 Open End Lug Nut |
| NWS12X1.5-ET |
|
12MM X 1.5 Open End Lug Nut ET, Req. FJC front w/ spacers (EA) |
| GM3830672 |
|
12P & 12T GM Posi X/Pin Bolt |
| NPHGM12P-10 |
|
12P 67-69 Camaro Multi-Leaf W/ 30 Spline Bolt-In Axles (Welded Tubes, Steel Cap) |
| GM12P-513-NG |
|
12P GM 5.13 R&P |
| GM3957940 |
|
12P GM P/G T/W, Posi & Standard, (Has Inside Step/Lip For New Eatons) |
| GM3957940-NL |
|
12P GM P/G T/W, Posi, W/O Lip For Old Design P/G's |
| NPGMWOEK |
|
12P GM Weld on Housing End Kit |
| NS99170 |
|
12P, 12T, CI VET, & 55 GM 8460N Redi Sleeve Yoke Saver |
| GM3954480 |
|
12P, T100, Tacoma, Tundra C/Sleeve |
| GM3846425 |
|
12T & 12P GM S/G T/W, STD |
| EAT19556 |
|
12T GM, 3.73-5.38, Eaton Posi, 30 Spline.. |
| GM3931175 |
|
12T, 12P, 55T, Standard & Posi, Cross Pin Shaft |
| DAN2-70-18X |
|
1310 & 1330 U-Joint Strap Kit D30, D44, M35, & 9.25" W/Bolts |
| DAN5-134X |
|
1310 To 1330 Adapter U-Joint, All Caps (1-1/16") |
| DAN5-460X |
|
1310 To 1350 Adaptor U-Joint |
| DAN5-353X |
|
1310 To 7260 Adapter U-Joint |
| DAN5-354X |
|
1310 To 7290 Adapter U-Joint |
| DAN5-3022X |
|
1310 To M3R Adaptor U-Joint 8.2 BOP To Chevy |
| DAN5-153X |
|
1310 U-Joint with Grease Zerk |
| YOKD44-1310-10U |
|
1310, 10 Spline Nitro U-Bolt Yoke for Dana 25, 27, 30, 44 & 50 |
| YOKD44-1310-10S |
|
1310, 10 Spline, Nitro Strap Yoke for Dana 25, 27, 30, 44 & 50 |
| YOKD28-1310-23 |
|
1310, 23 Spline, Nitro Pinion Yoke for Dana 28 |
| YOKD44JK-1310-24 |
|
1310, 24 Spline, Jeep JK, Nitro U-bolt Yoke for Dana 30 & 44 |
| YOKD44-1310-26S |
|
1310, 26 Spline, Nitro Strap Yoke for Dana 30, 44 & 50 |
| YOKM35-1310-26S |
|
1310, 26 Spline, Nitro Strap Yoke for Dana 35 |
| YOKD44-1310-26U |
|
1310, 26 Spline, Nitro U-bolt Yoke for Dana 30, 44& 50 |
| YOKD60-1310-29S |
|
1310, Nitro Strap Yoke for Dana 44HD,60,70 |
| DAN2-94-28X |
|
1310, Nitro U-bolt Kit (D30, D44, GM 8.2", 12P, 12T, Vette, M20) |
| DAN5-648X |
|
1330 To 1350 Adaptor U-Joint (1330 Caps=1-1/16) |
| DAN5-3227X |
|
1330 TO 7290 Adapter U-Joint |
| DAN5-1204X |
|
1330 U-Joint 2 - 1-1/8" Caps And 2 1-1/16" Caps 3.625 Span |
| DAN5-792X |
|
1330 U-Joint 2 - 1-1/8" Caps And 2 1-1/16" Caps 3.625 Span, Forged Spicer |
| YOKD44JK-1350-24S |
|
1330, 24 Spline, Jeep JK, Nitro Strap Yoke for Dana 30 & 44 |
| YOKD44-1330-26S |
|
1330, 26 Spline, Nitro Strap Yoke for Dana 30, 44& 50 |
| YOKM35-1330-26S |
|
1330, 26 Spline, Nitro Strap Yoke for Dana 35 |
| YOKD44-1330-26U |
|
1330, 26 Spline, Nitro U-bolt Yoke for Dana 30, 44& 50 |
| YOKD60-1330-29S |
|
1330, 29 Spline, Nitro Strap Yoke for Dana 60 & 70 for Dana 60 & 70 |
| DAN2-94-58X |
|
1330, Dana Spicer U-bolt Kit (7260 & 7290 Billet) |
| DAN3-70-28X-BIL |
|
1350 & 1410 Series Billet U-Joint Bearing Cap Kit |
| DAN3-94-18X |
|
1350 & 1410 U-Joint U-Bolts, 3/8" X 1-11/16", Kit |
| DAN2-1435 |
|
1350 To 1410 Adapter U-Joint |
| YOKD44-1350-26S |
|
1350, 26 Spline, Nitro Strap Yoke for Dana 30, 44 & 50 |
| YOKD60-1350-29U |
|
1350, 29 Spline, Nitro U-bolt Yoke for Dana 60 & 70 |
| AXN38803-30 |
|
14.14" 30 Spline Inner Right Hand Axle 72-81 Jeep CJ5, for Dana 30 |
| DAN5-1410X |
|
1410 U-Joint Forged 1.185" Cap (Old #5-801X) |
| YOKD60-1410-29S |
|
1410, 29 Spline, Nitro Strap Yoke for Dana 60 & 70 |
| YOKD60-1410-29U |
|
1410, 29 Spline, Nitro U-bolt Yoke for Dana 60 & 70 |
| YOKD80-1410-37S |
|
1410, 37 Spline, Nitro Strap Yoke for Dana 80 |
| DAN3-94-28X |
|
1480 & 1550 U-Bolt Nitro Yoke Kit |
| DAN5-188X |
|
1480 U-Joint W/ Outside Sr For Ds Only 1.375" Cap |
| YOKD80-1480-37S |
|
1480, 37 Spline, Nitro Strap Yoke for Dana 80 |
| NWS14X1.5LUG |
|
14MM X 1.5 OPEN END LOW-PROFILE CONICAL LUGNUT |
| GM12338040 |
|
14MM X 1.5 Wheel Stud Fits Axles With .600" Stud Hole |
| GM14TGASKET |
|
14T 10.5" GM COVER GASKET |
| GM26008741 |
|
14T C/Sleeve, 89 & Newer |
| NS2081 |
|
14T F/F & HO72 AXLE SEAL |
| GM331421 |
|
14T GM Ring Gear Bolt 4.56 & Up |
| NS2286 |
|
14T PINION SEAL |
| BRGHM803149 |
|
14T, D70-U Bearing |
| GM3663696 |
|
14T, Standard X/Pin Shaft, Cross Type, 4 Pin Design |
| AXD76812-1X |
|
15 Spline Right Hand Axle Assembly for Dana 44 |
| AXN48203 |
|
15.39" Ford 35 Spline, 5-806X, Left Hand Nitro 4340 Inner Axle Shaft for Dana 60 |
| AXN39459 |
|
15.80" 30 Spline 5-297X, Left Hand Nitro 4340 Inner Axle Shaft for Dana 30 & Dana 44 |
| AXN48200 |
|
15.9" 30 Spline 5-806X, Left Hand Nitro 4340 Inner Axle Shaft for Dana 50 |
| AXD660182-1 |
|
15.96" 35 Spline Nitro Front Inner Axle Shaft for Dana 60 |
| AXN48202 |
|
15.96", Dodge 35 Spline, 5-806X, Nitro 4340 Inner Axle Shaft for Dana 60 |
| AXD27902-25X |
|
16.1", 86-93 Dodge, 30 Spline 297X , Nitro Front Inner Axle Shaft for Dana 44 |
| AXN38818 |
|
16.1", Dodge 30 Spline, 5-297X, Nitro 4340 Inner Axle Shaft for Dana 44 |
| AXN48204 |
|
16.17", Ford 35 Spline 5-806X, Nitro 4340 Inner Axle Shaft for Dana 60 |
| AXD27902-21X |
|
16.5" 30 Spline 297X, Nitro Front Inner Axle Shaft for Dana 44 |
